Sorry wrong list.
Zack
On Wed, Jul 24, 2002 at 12:54:22PM -0400, Zack May wrote:
-> I am wondering if it is possible to move a disk from one controller to
-> another, also is it possible to change the ENCLR-TYPE name? I have
-> not been able to find documentation on how to do this, can anyone
-> point me in the correct direction?
->
-> (Actually output)
-> # vxdmpadm listctlr all
-> CTLR-NAME ENCLR-TYPE STATE ENCLR-NAME
-> =====================================================
-> c0 Disk ENABLED Disk
-> c0 OTHER_DISKS ENABLED moya_A1000
-> c1 OTHER_DISKS ENABLED moya_A1000
-> c2 OTHER_DISKS ENABLED moya_A1000
->
->
-> (What I would like to see * around the changed items)
->
-> CTLR-NAME ENCLR-TYPE STATE ENCLR-NAME
-> =====================================================
-> c0 Disk ENABLED Disk
-> c0 *Disk* ENABLED *Disk*
-> c1 OTHER_DISKS ENABLED moya_A1000
-> c2 OTHER_DISKS ENABLED moya_A1000
->
->
-> The OTHER_DISKS (c1, c2) are actually two attached A1000's and
-> c0 is a second internal disk I plan to use as a root mirror.
->
-> Any help or guidance will be much appreciated.
->
-> Zack
->
->
-> _______________________________________________
-> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
-> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
--
_____________________________________________________________________________
| Zack May | Phone: (919) 392-8099 | Pager: (800) 796-7363 |
| Tacsuns Team RTP | mobile: (919) 345-8621 | Pin : 100-3838 |
| Cisco Systems, Inc. | Email: zmay AT cisco DOT com |
|
|____________________________________________________________________________|
|