Veritas-bu

[Veritas-bu] sgscan missing shared drive

2002-04-11 21:36:05
Subject: [Veritas-bu] sgscan missing shared drive
From: larry.kingery AT veritas DOT com (Larry Kingery)
Date: Thu, 11 Apr 2002 21:36:05 -0400 (EDT)
You need to consult the MM Device Configuration Guide.  Looks like you
missed the section on adding SCSI/LUN support for devices greater
than...   

Your second tape drive is on LUN 1, but Solaris out of the box only
looks at LUN 0.


Markham, Richard writes:
> A media server is showing the following: 
> 
> sgscan output: 
> /dev/sg/c0t0l0: Disk (/dev/rdsk/c0t0d0): "SEAGATE ST336704LSUN36G" 
> /dev/sg/c0t1l0: Disk (/dev/rdsk/c0t1d0): "SEAGATE ST336704LSUN36G" 
> /dev/sg/c0t6l0: Cdrom: "TOSHIBA DVD-ROM SD-M1401" 
> /dev/sg/c2t0l0: Tape (/dev/rmt/0): "QUANTUM DLT8000" 
> /dev/sg/c3t0l0: Changer: "STK     L40" 
> /dev/sg/c3t0l1: Tape (???): "QUANTUM DLT8000" 
> 
> the second tape drive should reflect '/dev/rmt/1' where there is '???' 
> i check and there is link lights on the brocades for the two fiber
> connections 
> and my other media managers that are split across the same two brocades
> are 
> accessing both the shared tape drives correctly.  I can say this is
> machine specific 
> but to include the fiber cable as well. 
> 
> patchlevel NB_34_2 on Solaris 8 
> 
> i recently rm /dev/rmt/* and 'drvconfig' & 'tapes'.  /dev/rmt/ shows no
> 1* 
> 
> anyone have a suggest on what could be the issue? 
> 

[html removed]

-- 
Larry Kingery 
                       Does fuzzy logic tickle?

<Prev in Thread] Current Thread [Next in Thread>