Don't think so.
Kevin Vapiwala
Salomon Smith Barney
Vital Records Group
2nd Floor, Rutherford
Phone: 201-231-0348
Group Line: 201-231-1270
-----Original Message-----
From: mike.powers AT abnamro DOT com
[mailto:mike.powers AT abnamro DOT com]
Sent: Wednesday, February 27, 2002 4:10 PM
To: Vapiwala, Kevin V [IT]
Cc: Brochart, Fabrice;
'veritas-bu AT mailman.eng.auburn DOT edu'; Brochart, Fabrice
Subject: RE: [Veritas-bu] SSO problems with Solaris
2.6 and 2.8
Any chance you have the avrd process hanging?
Mike
"Brochart, Fabrice"
<BrochF AT europe.stortek DOT com>@mailman.eng.auburn.edu on
02/27/2002 04:52:38 AM
Sent by: veritas-bu-admin AT mailman.eng.auburn DOT edu
To: "'Vapiwala, Kevin V [IT]'"
<kevin.v.vapiwala AT ssmb DOT com>, "Brochart,
Fabrice" <BrochF AT europe.stortek DOT com>
cc: "'veritas-bu AT mailman.eng.auburn DOT edu'"
<veritas-bu AT mailman.eng.auburn DOT edu>
Subject: RE: [Veritas-bu] SSO problems with Solaris 2.6 and
2.8
Well,
If you're sure that you st.conf is correct, then maybe you
can mount a tape
in a drive with robtest and test it with a tar or dd command
?
Maybe there a confusion in the order of your drives.
That's all I can do for you !
F@brice
-----Original Message-----
From: Vapiwala, Kevin V [IT]
[mailto:kevin.v.vapiwala AT ssmb DOT com]
Sent: lundi 25 février 2002 17:32
To: 'Brochart, Fabrice'
Cc: 'veritas-bu AT mailman.eng.auburn DOT edu'
Subject: RE: [Veritas-bu] SSO problems with Solaris 2.6 and
2.8
Sorry for the long delay in my response, here it goes:
Nb is patched to 34_2
st.conf is correct on both solaris boxes, sgscan can see the
drives as
well.
The swithes are Mcdata 32 and 64 ports, the clients are
actually hooked
into
connectrix 32 port, but for the SDLT, it goes through a
crossroads 3250
bridge
HBA: on the 2.8 box, Emulex LP800 4.2k
on the 2.6 box, JNI:FCI-1063 2.5.9
-----Original Message-----
From: Brochart, Fabrice [mailto:BrochF AT europe.stortek DOT
com]
Sent: Wednesday, February 20, 2002 4:30 AM
To: Vapiwala, Kevin V [IT]
Cc: 'veritas-bu AT mailman.eng.auburn DOT edu'
Subject: RE: [Veritas-bu] SSO problems with Solaris 2.6 and
2.8
Hi Kevin,
Have you installed all necessary patches from SUN&Veritas ??
Have you set up the solaris's st.conf file ??
What kind of switch do you use ??
What kind of HBA, firmware ??
Fabrice
-----Original Message-----
From: Vapiwala, Kevin V [IT] [
mailto:kevin.v.vapiwala AT ssmb DOT com
<mailto:kevin.v.vapiwala AT ssmb DOT com> ]
Sent: mardi 19 février 2002 20:00
To: 'Atif Naseem'; veritas-bu AT mailman.eng.auburn DOT edu;
roger AT rogerpatrick DOT com
Subject: [Veritas-bu] SSO problems with Solaris 2.6 and 2.8
Guru's,
I'm having trouble getting SSO backups to work on Solaris
machines with
tapes on the SAN. Here's the setup:
One Unix Master Server, attached to STK L700
Two Solaris media servers 2.8 and 2.6
Win2k Media server.
The Win2k server backups up fine he can see an SDLT drive
and a 9940 on the
SAN. The 2.6 machine sees 2 SDLT drives on the SAN. The 2.8
machine sees a
9940 Driver on the SAN. When I try to run the backup it gets
to a point
where it tries to mount the tape and puts the tape in the
drive, but after
that , nothing. Anyone have any ideas?
Kevin Vapiwala
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
<http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu>
|