For exited with status 14 (file write failed)

On Windows NT/2000 systems, the client bpbkar log may contain a 10054
"Connection Reset Error"error (usually indicates a hardware error).
Somewhere between the NetBackup client and server, the connection was reset.
When NetBackup receives this error, it is unable to continue the backup.
This error has been attributed to the following:
- A hiccup in the network.
- A bad network interface card on a NetBackup
- A bad network interface card on the NetBackup server.
- Faulty routers.
- Other applications interfering with NetBackup connections.

I suggest you the check the following.

Ensure that the Network settings are correct (NIC, Hub, Switch, Router,
etc.)(Full duplex vs half duplex; make sure it is the same across the
network).
Run a test from that client; try to transfer a file from that client to the
server and compare the transfer rate with an other client.


Adam.


----- Original Message -----
From: "Fernandes, Eustace" <EFernandes AT talisman-energy DOT com>
To: <Veritas-bu AT mailman.eng.auburn DOT edu>
Sent: Tuesday, January 29, 2002 1:01 PM
Subject: [Veritas-bu] get_msgQ: msgget failed (-1)


> Result client NT 2000 failed with exit status 14
> Has anyone seen this error,  is it related to /etc/system  message queue ?
> .what parameter? .. mni ?
> Eustace Fernandes
>
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>