[Veritas-bu] primary copy did not change to the new image

2001-12-10 11:25:10
Subject: [Veritas-bu] primary copy did not change to the new image
From: David A. Chapa" <david AT xbpadm-commands DOT com (David A. Chapa)
Date: Mon, 10 Dec 2001 08:25:10 -0800 (PST)
The copy number doesn't change, the field you want to 
look at for verification is the PC field, this is the 
Primary Copy field. 

Before you changed this this would have had 1 in its 
entry.  After you ran this command, this would have a 2 
in the field.  The way to read this field is the 
Primary copy for this image is Copy X.


Quoting "Denn, Fred" <fdenn AT versitec DOT com>:

> Hello,
> change the primary copy by entering the following 
command (all on one
>   line):
>   /usr/openv/NetBackup/bin/admincmd/bpduplicate -npc 
pcopy -backupid bid
>   Where:
>   pcopy is the copy number you want to be the new 
>    This is the procedure that we followed.  However, 
after completion of
> the bpduplicate -npc 2 -backupid  command, the 
primary copy
> did not change to the new image.  I was able to 
verify this by looking
> at the images on media report.  It identifies in one 
of the fields the
> copy number.  The command when executed does not give 
any errors.
>  Any answers would be greatly appreciated!!!!
> Fred...
> _______________________________________________
> Veritas-bu maillist  -  Veritas-
bu AT mailman.eng.auburn DOT edu

David A. Chapa
Consulting Manager
DataStaff, Inc.
847 413 1144
NBU-LSERV AT datastaff DOT com - Adv. Scripting

<Prev in Thread] Current Thread [Next in Thread>