On Mon, Feb 12, 2001 at 11:09:03AM -0800, Everett, Craig wrote:

You are not alone....

DLT7000 Tape System Product Manual p.5-56 contains a list of 
TapeAlert Flags, Severity Levels, and Meanings for LOG SENSE
command. There are 9 flags, and 6 of them correspond to 
cleaning requests. 3 of them have Severity Level Critical 
and 3 just Warnings. I think NetBackup ignores Warnings 
and taking care of Critical errors, becous I've seen NetBackup
cleaning a tape drive.

You can ignore them too .... 
I am checking my library every day and clean a tape drive 
if I see a cleaning request on a front panel.

Thanks,
Andrew


> Background:
> Sun E-450/Solaris 2.6
> Netbackup 3.2
> Storagetek L700 and 9740 Libraries
> DLT 7000 Drives w/ 245F and 2565 microcode levels
> Problem: Drives are not self cleaning using tape alert
> 
> 
> Issue:
> I recently implemented the tape alert method of cleaning on all of my master
> servers. I set up barcode rules and inserted cleaning tapes as required. The
> master server is aware of the cleaning tape:
> 
> Masterserver# vmquery -b -mt dlt_clean
> media   media     robot  robot  robot  side/  optical  # mounts/last
> ID     type      type     #    slot   face   partner  cleanings   
> mount time
> ---------------------------------------------------------------------
> CLN002  DLT_CLN   NONE     -      -     -       -           0     00/00/00
> 00:00
> CLN003  DLT_CLN   NONE     -      -     -       -           0     00/00/00
> 00:00
> CLN001  DLT_CLN   NONE     -      -     -       -           0     00/00/00
> 00:00
> CLN008  DLT_CLN   NONE     -      -     -       -           0     00/00/00
> 00:00
> CLN016  DLT_CLN   NONE     -      -     -       -           0     00/00/00
> 00:00
> CLN000  DLT_CLN   TLD      0    248     -       -          20     00/00/00
> 00:00
> 
> So I know I have the cleaning tape available and mouts are at 20 ( it's a
> new tape ). Manual Cleaning works. Drive cleaning frequency is set to 0. I
> keep finding tape drives with their cleaning light on ( cleaning required )
> , but I don't see any cleaning occurring indicated by decremented cleaning
> tape mounts. I've set VERBOSE in my vm.conf so I can see the request for
> cleaning entered in the /var/adm/messages log but nothing ever comes
> through? Has anyone ever seen this? Is there a command to simulate a drive
> requesting a cleaning besides doing a manual cleaning? What netbackup log
> would be a good place to find some hidden problem that are perhaps
> preventing the cleaning? Any input would be greatly appreciated. 
> 
> Thanks,
> Craig Everett
> Technology Operations-Storage Team
> Intuit Inc
> craig_everett AT intuit DOT com
> 
> 
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

-- 
----
Andrew Shinkarev
Network Systems Specialist
Abbott Laboratories
(847) 9387559
shinkara AT pprd.abbott DOT com