i have found one or two postings from users with similar problems, but
i have not found any responses to their requests for help, so please
bear with me if this seems a repeat.

i'm using NBU 3.2 on solaris 2.7. i have been unable to complete
backups recently and have tracked the problem to what appears to be
bpsched. my bpsched log shows the following:

23:53:30 [12454] <4> bpsched: INITIATING...
23:53:30 [12454] <2> logparams: /usr/openv/netbackup/bin/bpsched 
23:53:30 [12454] <4> db_ATTDEFS: Class_att_defs protocol 3.2
23:53:30 [12454] <4> bpsched_main: VSMInit () failed: 2d
23:53:31 [12454] <4> ?:   post process images:   yes
23:53:31 [12454] <4> ?:   keep tir:   yes
23:53:31 [12454] <2> getsockconnected: Connect to makita on port 753
23:53:32 [12454] <2> getsockconnected: Connect to makita on port 537
23:53:33 [12454] <2> getsockconnected: Connect to makita on port 947
23:53:34 [12454] <2> getsockconnected: Connect to makita on port 847
23:53:35 [12454] <2> getsockconnected: Connect to makita on port 593
23:53:36 [12454] <2> getsockconnected: Connect to makita on port 577
23:53:37 [12454] <2> getsockconnected: Connect to makita on port 723
23:53:38 [12454] <2> getsockconnected: Connect to makita on port 727
23:53:39 [12454] <2> getsockconnected: Connect to makita on port 753
23:53:40 [12454] <2> getsockconnected: Connect to makita on port 1001
23:53:41 [12454] <2> getsockconnected: Connect to makita on port 563
23:53:42 [12454] <2> getsockconnected: Connect to makita on port 831
23:53:43 [12454] <2> getsockconnected: Connect to makita on port 593
23:53:44 [12454] <2> getsockconnected: Connect to makita on port 593
23:53:45 [12454] <2> getsockconnected: Connect to makita on port 595
23:53:46 [12454] <2> getsockconnected: Connect to makita on port 583
23:53:47 [12454] <2> getsockconnected: Connect to makita on port 753
23:53:48 [12454] <2> getsockconnected: Connect to makita on port 1017
23:53:49 [12454] <2> getsockconnected: Connect to makita on port 691
23:53:50 [12454] <2> getsockconnected: Connect to makita on port 943
23:53:51 [12454] <2> getsockconnected: Connect to makita on port 593
23:53:52 [12454] <2> getsockconnected: Connect to makita on port 609
23:53:53 [12454] <2> getsockconnected: Connect to makita on port 979
23:53:54 [12454] <2> getsockconnected: Connect to makita on port 1015
23:53:55 [12454] <2> getsockconnected: Connect to makita on port 753
23:53:56 [12454] <2> getsockconnected: Connect to makita on port 969
23:53:57 [12454] <2> getsockconnected: Connect to makita on port 819
23:53:58 [12454] <2> getsockconnected: Connect to makita on port 543
23:53:59 [12454] <2> getsockconnected: Connect to makita on port 593
23:54:00 [12454] <2> getsockconnected: Connect to makita on port 625
23:54:01 [12454] <2> getsockconnected: Connect to makita on port 851
23:54:02 [12454] <2> getsockconnected: Connect to makita on port 871
23:54:02 [12454] <16> getsockconnected: exceeded timeout of 30 seconds
23:54:02 [12454] <2> getsockconnected: sockfd:-1 timo:32
23:54:02 [12454] <16> bpcr_connect: Can't connect to client makita
23:54:02 [12454] <16> start_bptm: connection refused by host makita
23:54:02 [12454] <16> get_stunits: get_num_avail_drives failed with
stat 204
23:54:02 [12454] <4> get_db_info: no available storage units
23:54:02 [12454] <8> bpsched_main: failed getting database information
23:54:02 [12454] <16> log_in_errorDB: scheduler exiting - no storage
units available for use (213)
23:54:02 [12454] <16> bpsched: scheduler exiting - no storage units
available for use (213)



and thus i endup with a 213 error. if i specify the storage unit in my
class definition then i get a error 219. i can't tell what exactly is
going wrong, the entried for NBU are still in inetd.conf and inetd is
running.

any help would be appreciated.