You can use the /usr/openv/volmgr/bin/vmchange command to change the media
type.
(Change volume's media type)
vmchange [-M <master_server>] [-h <volume_database_host>]
-new_mt <media_type> -m <media_id>
On Wed, 24 Jan 2001 Warren.Landrum AT microchip DOT com wrote:
> Hi,
>
> I'm a new Veritas administrator who is having some problems that Veritas
> Tech support could not provide me an answer with. Here's my situation.
>
> I've got an NT Master/Media server that is controlling 2 jukeboxs. The one
> jukebox (JB1), 2 DLT 8000 drives, is directly attached to master server.
> The other jukebox (JB2), 2 DLT 4000 drives, is directly attached to a
> Network Appliance Filer.
>
> When the consultant from Veritas came out and worked with me, he suggested
> we make the media types of the two jukeboxes different, so that when we
> pulled up the list of all Volumes, we could easily tell which jukebox a
> tape should go in. For JB1, we used DLT - for JB2, we used DLT2. He
> allocated some tapes that were in JB2 as DLT2 and everything was fine.
>
> But here's the problem. I now need to put MORE tapes as Media Type DLT2 so
> that I can put them in the scratch pool and the various classes that use
> JB2 can grab them as I need them. In talking to Veritas Tech Support, the
> guy said that if the Drive Type is DLT2 (which it is on JB2) and I put new
> bar-code labled tapes in there and inventory them, it should pick them up
> as DLT2. I did this and it did not happen.
>
> So, bottom line, if I can figure out how to change the Media Type from DLT
> to DLT2, I'll be all set.
>
> Anybody have an answer?
>
> Thanks in advance - I Hope!
>
> Warren G. Landrum, Jr.
> Operations Supervisor
> NT/VMS Systems Administrator
> Microchip Technology
> w: 480-792-7746
|