Hi there,

What does it mean when I get these four notifications at the same time:

- backupserv's tape mount request
- Saveset marked suspect
- Volume marked full
- Verify Label failed on unload

All four contain:
NetWorker media: (alert) waiting for LTO Ultrium-4 tape xxx on server

This notification was issued this morning yet the tape now still is in the 
drive (shown as 100% appendable) and backup doesn't really proceed.

It was in there before these notifications, and it's in there still after:

...
71659 03/17/13 05:31:07  0 0 2 4149614320 8967 0 backupserv nsrd xxx done 
saving to pool 'p' (XL0334L4) 39 GB
70896 03/17/13 05:31:07  0 0 2 4149614320 8967 0 backupserv nsrd xxx saving to 
pool 'p' (XL0334L4)
71659 03/17/13 07:47:15  0 0 2 4149614320 8967 0 backupserv nsrd 
backupserv:index:x done saving to pool 'p' (XL0334L4) 4948 MB
42502 03/17/13 09:05:30  2 0 0 4149614320 8967 0 backupserv nsrd media info 
event: LTO Ultrium-4 tape XL0334L4 will be needed
42502 03/17/13 09:05:30  2 0 0 4149614320 8967 0 backupserv nsrd media waiting 
event: waiting for LTO Ultrium-4 tape XL0334L4 on backupserv
42502 03/17/13 09:20:30  2 0 0 4149614320 8967 0 backupserv nsrd media critical 
event: waiting for LTO Ultrium-4 tape XL0334L4 on backupserv
42502 03/17/13 09:30:30  2 0 0 4149614320 8967 0 backupserv nsrd media alert 
event: waiting for LTO Ultrium-4 tape XL0334L4 on backupserv
70896 03/17/13 12:04:37  0 0 2 4149614320 8967 0 backupserv nsrd xxx saving to 
pool 'p' (XL0334L4)
71659 03/17/13 12:35:06  0 0 2 4149614320 8967 0 backupserv nsrd xxx done 
saving to pool 'p' (XL0334L4) 392 MB
...

What's going on?

This is Networker 7.5.

Thanks.

+----------------------------------------------------------------------
|This was sent by jm+backupcentral AT roth DOT lu via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------