> There was an issue with NW 7.5/7.6 (don't remember exactly) on
> Windows only where the whole process ran normally but in the end the
> info could not be updated in the CFI. I have experienced this myself.
>
> You can also verify that but only if you use added verbosity
> "scanner -iv". The error will show as follows:
>
> .....
> 8758:scanner: scanning file 154, record 7100
> 8758:scanner: scanning file 154, record 7200
> 8758:scanner: scanning file 154, record 7300
> 8758:scanner: scanning file 154, record 7400
> 29485:scanner: ssid 2610523820: scan complete
> 8786:scanner: ssid 2610523820: 473 MB, 2542 file(s)
> 8830:scanner: (ssid 2610523820) index error, flush failed
> 39077:scanner: error, Cannot commit saveset for client 'client_name'
> (Access is denied.)
Yeah, I am re-running the scanner command, this time specifying the SSID
and client name:
>scanner -v -s NW-server -i -S 194492739 -c old-psfile2 \\.\Tape2147483646
8909:scanner: using 'rd=Storage-Node:\\.\Tape2147483646' as the device
name
9000:scanner: \\.\Tape2147483646: opened for reading
9003:scanner: \\.\Tape2147483646: rewinding
8968:scanner: Reading the label...
8969:scanner: Reading the label done
8936:scanner: scanning sdlt320 tape 1127153768 on
rd=Storage-Node:\\.\Tape2147483646
8937:scanner: volume id 1424751485 record size 131072
created 3/27/08 15:54:37 expires 3/27/10 15:54:37
8939:scanner: sdlt320 tape 1127153768 already exists in the media index
9003:scanner: \\.\Tape2147483646: rewinding
8973:scanner: setting position from fn 0, rn 0 to fn 2, rn 0
8744:scanner: searching for ssid(s): 194492739
8745:scanner: OR
8747:scanner: client(s): old-psfile2
|