Hi, 

I have received a number of backup tapes that I need to restore data from which 
include Exchange stores and loose documents. I have setup an environment but 
don't have any details of the tapes. What information would I need to perform 
an index and restore the data?

I have tried scanning in the tapes but I am getting the following error below. 
I have tried adjusting the maximum block size which I read could be causing an 
issue but I still have the same problem.

Any help would be great.

C:\Program Files\Legato\nsr\bin>scanner -i -v \\.\Tape0
8909:scanner: using '\\.\Tape0' as the device name
9000:scanner: \\.\Tape0: opened for reading
9003:scanner: \\.\Tape0: rewinding
8968:scanner: Reading the label...
8969:scanner: Reading the label done
8936:scanner: scanning 4mm tape MJ0714L3 on \\.\Tape0
8937:scanner: volume id 4012767220 record size 131072
  created  7/26/11  9:10:44 expires  7/25/13  9:10:44
32350:scanner: adding 4mm tape MJ0714L3 to pool TapeBackup
9003:scanner: \\.\Tape0: rewinding
8973:scanner: setting position from fn 0, rn 0 to fn 2, rn 0
8770:scanner: fn 2 rn 0 read error More data is available.

9000:scanner: \\.\Tape0: opened for reading
8770:scanner: fn 2 rn 0 read error More data is available.

9000:scanner: \\.\Tape0: opened for reading
8761:scanner: done with 4mm tape MJ0714L3

9003:scanner: \\.\Tape0: rewinding

+----------------------------------------------------------------------
|This was sent by fred.fernandez AT fh.com DOT au via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------