Re: [Networker] Why cant I change the browse time on this CFI?
2011-09-21 14:04:36
On 2011-09-21 13:41, bingo wrote:
Hi George,
sorry for causing the confusion as i mixed up similar issues. In fact there are
2 'index' options:
For the savegroup (no index save)
Using it means that no index BACKUP will be made at the end of this
savegroup.
For the pool (Store index entires)
Deselecting this default option will result in the behavior i described
- no embedded index
data is generated. Consequently, no index can backed up later and
scanning will not be able
to rebuild it.
Yes, that clears things up mostly, but two questions:
1. Even if the index does not get updated because the pool doesn't have
the "Store index entries" turned on, what would happen if the group did
*NOT* have "no index save" checked? Obviously, nothing would have
changed in the index, thus no backup of the index to tape, but lets say
isntead that a full was being run, and not an incremental. Would NW send
a copy of the index to tape in that case even though no change was
affected on it?
2. I'm unclear on why indexing being turned off for the pool would
preclude you from scanning the tape and adding that information to the
index? Is it the case that if the data was never indexed before then you
can't add it to the index later? Or are you instead referring to using
scanner to recover an index that was never written to tape? That
obviously would not be possible since it was never sent to tape.
Sorry to be going round and round on this. Just want to be clear on my
understanding.
Thanks :)
George
Does this help?
+----------------------------------------------------------------------
|This was sent by carsten_reinfeld AT avus-cr DOT de via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
--
George Sinclair
Voice: (301) 713-3284 x210
- The preceding message is personal and does not reflect any official or
unofficial position of the United States Department of Commerce -
- Any opinions expressed in this message are NOT those of the US Govt. -
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|