[Networker] Multiple drives for recovery?
2010-03-10 21:49:53
Anyone else seen this?
I run a browsable recover (CLI), requiring one full and three
incremental tapes. NW loads all tapes (6 drives in tape library) and
starts reading from each, rather than starting with the full and working
through one tape at a time, to the last incr?
This is on 7.5SP1 on RH Linux. Client is running an older 7.2.2 release.
I think I might have seen this happen every once in a while on older
server releases? Is it possible that NW can somehow read from multiple
tapes for the recover and manage all that, say, under certain recovers,
maybe depending on what it knows needs to be recovered that won't be
jeopardized by anything else that needs to be recovered from one of the
other tapes?
George
--
George Sinclair
Voice: (301) 713-3284 x210
- The preceding message is personal and does not reflect any official or
unofficial position of the United States Department of Commerce -
- Any opinions expressed in this message are NOT those of the US Govt. -
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] Multiple drives for recovery?,
George Sinclair <=
|
|
|