>From what you have said, i guess you have set 22 and 23 as cleaning slots in 
>the library hardware configuration and 1-21 are available to hold data 
>cartridges. In this way, you will not get access to slots 22 and 23 from 
>Networker as these two slots are being handled by the library itself. 

If you want to let networker handle cleaning, then you should disable  cleaning 
settings in the library hardware configuration. then put just one cleaning 
cartridge in slot 23 and re-configure the library in networker using jbconfig. 

hopefully after this you can set the cleaning slot range as 23-23 and data slot 
range as 1-22.


opopanax




pereubu wrote:
> 1. ADIC Scalar 24 manual configuration. Slot 22 i 23 contains  cleaning 
> cartiges. I could not move them to the slots 0-21. I could change slot 21 to 
> be to cleaning slot, but still there is no way to move cleaning tape to slot 
> 21 from let say slot 22. Nonetheless, I could  perform cleaning manually.
> 
> 2. I have already read about command nsrjb, but at this instance I am using 
> GUI. "Device"-Select "Library" then "Properties"-"General"-"Cleaning" and 
> then "Cleaning Slots" to select range for the slots set aside for cleaning 
> cartridge in the jukebox when "auto clean" is set to "Yes". The problem is 
> that I could only set cleaning slots from 0-21, no  22 neither 23. That might 
> be in some connection with how Networker 7.4 talks to ADIC Scalar 24 jukebox, 
> I guess?
> 
> I do not have 3 cleaning cartages, to see whether the third cleaning cartages 
> would be able to move in to slot 21 or not.


+----------------------------------------------------------------------
|This was sent by carnegie.deli AT gmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER