There is a command to set tape uses
As far as I know best practise is to let your tapelib handle cleaning
------Origineel bericht------
Van:MIchael Leone
Aan: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Beantwoorden:EMC NetWorker discussion
Beantwoorden:Michael.Leone AT PHA.PHILA DOT GOV
Onderwerp: [Networker] Cleaning tapes show 0 uses left?
Verzonden: 16 december 2009 17:50

I always used to let my library handle cleaning, so I never had to reserve 
cleaning slot, or schedule cleaning jobs using Networker, etc. But since I 
upgraded my SDLT600 library to LTO4, I decided to use Networker to handle 
cleaning. So I set the last 5 slots to be cleaning slots, and adjusted the 
number of available slots and cleaning slots in the Networker definition 
of the library accordingly. Then I loaded up 5 new, unused cleaning tapes 
into the slots.

Networker sees the 5 cleaning tapes in the right slots, but says each is a 
"Cleaning Tape (0 uses left)". Why does it think there are 0 uses left? 
>From looking through the Admin guide, it does not appear that I need to 
set tape to the number of uses left. 

What am I missing here?

-- 
Michael Leone
Network Administrator, ISM
Philadelphia Housing Authority
2500 Jackson St
Philadelphia, PA 19145
Tel:  215-684-4180
Cell: 215-252-0143
<mailto:michael.leone AT pha.phila DOT gov>

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER



met vriendelijke groeten / With kind regards

Frank Terveen
--------------------------
Sent via BB
Disclaimer:
http://www.afm.nl/disclaimer
http://www.afm.nl/disclaimer_english/
Indien u de link niet kunt openen, neemt u dan contact op met 
telefoonnummer +31 (0)20 7972000. Meer informatie vindt u op de 
website http://www.afm.nl.
If you are unable to access the link, please dial +31 (0)20 
7972000 
Additional information is available on the website 
http://www.afm.nl.

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER