Resolution:
Here is the recap of this issue:
What we have seen across our production and a clean test environment was:
Server:
Sun T5140 running Solaris 10 sparc 5/08.
Legato Networker 7.5 build 179
Client:
Sun X4150 running Solaris 10 x86 10/08
Legato Networker 7.5.Build 315
I can backup Sparc based clients no problem. When try an X86 machine I
get the following:
savegrp: suppressed 2 lines of verbose output
/export/home/systems/LGTOzh/reloc/share/man/zh/man5/resource.5
/export/home/systems/LGTOzh/reloc/share/man/zh/man5/
/export/home/systems/LGTOzh/reloc/share/man/zh/
/export/home/systems/LGTOzh/reloc/share/man/
/export/home/systems/LGTOzh/reloc/share/
/export/home/systems/LGTOzh/reloc/
/export/home/systems/LGTOzh/
/export/home/systems/
39078:save: RPC error: Server can't decode arguments (severity 5, number 11)
7162:save: save of /export/home/systems to backup01 failed
I have tried this on both a Sun X4150 (intel) and an X4540 (amd). Same
error. On a sparc T5140 it completes. As well as on an sparc M5000 it
completes.
The test environment ruled out switches, firewalls, and past
configuration variables.
I then upgraded the test environment to 7.5 sp 1 on the server and clients.
The save worked perfectly across the same machines that previously
failed. I was also able to add an x86 based storage node and send
backups to it.
No hosts files or configuration changes were made during the upgrade. It
literally worked after doing the pkgrm/pkadd commands followed by
/etc/init.d/netoworker start; /etc/init.d/gst start
Ray
Ray Pengelly wrote:
hey everyone,
I'm having a little trouble getting Solaris 10 x86 based machine to
use the legato 7.5 client. Here is our setup:
Server:
Sun T5140 running Solaris 10 sparc 5/08.
Legato Networker 7.5 build 179
Client:
Sun X4150 running Solaris 10 x86 10/08
Legato Networker 7.5.Build 315
I can backup Sparc based clients no problem. When try an X86 machine I
get the following:
savegrp: suppressed 2 lines of verbose output
/export/home/systems/LGTOzh/reloc/share/man/zh/man5/resource.5
/export/home/systems/LGTOzh/reloc/share/man/zh/man5/
/export/home/systems/LGTOzh/reloc/share/man/zh/
/export/home/systems/LGTOzh/reloc/share/man/
/export/home/systems/LGTOzh/reloc/share/
/export/home/systems/LGTOzh/reloc/
/export/home/systems/LGTOzh/
/export/home/systems/
39078:save: RPC error: Server can't decode arguments (severity 5,
number 11)
7162:save: save of /export/home/systems to backup01 failed
I have tried this on both a Sun X4150 (intel) and an X4540 (amd).
Same error. On a sparc T5140 it completes.
Any ideas?
Ray
--
Ray Pengelly
Technical Specialist
Queen's University - IT Services
pengelly AT queensu DOT ca
(613) 533-2034
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|