Re: [Networker] : Backup of DB2 database
2009-10-02 09:01:57
Hi Ken
Pretty sure I have the correct syntax, I've used nsrdb2sv -F which I
understand should use the config stored at the server, rather than the
nmbd2.cfg file on the client.
I turned up the debug level, and got the following extra information.
Does anyone know if the "no matching resource" message means no matching
database resource or no matching resource in Networker?
* sanmonitor:DB2:/IBMCDP/NODE0000 RPC Authentication: Client successfully
authenticated using GSS Legato
* sanmonitor:DB2:/IBMCDP/NODE0000
* sanmonitor:DB2:/IBMCDP/NODE0000 No matching resource found.
* sanmonitor:DB2:/IBMCDP/NODE0000 NMDB2_ERROR: NMDB2_ERROR: Unable to retrieve
backup configuration from server.
* sanmonitor:DB2:/IBMCDP/NODE0000 (server = <servername>/ client =
sanmonitor.patent.gov.uk/ group = db2test)
* sanmonitor:DB2:/IBMCDP/NODE0000
* sanmonitor:DB2:/IBMCDP/NODE0000 NMDB2_ERROR: Unable to retrieve backup
configuration from server.
* sanmonitor:DB2:/IBMCDP/NODE0000 (server = <servername>/ client =
sanmonitor.patent.gov.uk/ group = db2test)
* sanmonitor:DB2:/IBMCDP/NODE0000 Exiting nsrdb2sv: Return Code -1
Thanks again.
Andy
-----Original Message-----
From: Ken Ciolek [mailto:kciolek AT optonline DOT net]
Sent: 02 October 2009 11:42
To: Networker List; Andy Williams
Subject: Re: [Networker] : Backup of DB2 database
Hi Andy,
Do you have the backup command set correctly for the DB2 module? You ca check
the admin guide for correct syntax.
Thanks,
Ken
Sent on the Now Network� from my Sprint® BlackBerry
-----Original Message-----
From: Andy Williams <Andy.Williams AT IPO.GOV DOT UK>
Date: Fri, 02 Oct 2009 10:10:16
To: <NETWORKER AT LISTSERV.TEMPLE DOT EDU>
Subject: [Networker] : Backup of DB2 database
Hi Guys
Anyone out there backing up DB2 on Windows 2003, we're using Networker V 7.4.4
and the networker module for DB2.
Normal file level backups are working correctly, I just can't get the DB2 side
backups running.
If I try to initiate a database backup I get the following message at the
Networker server end, same message shows in applog.
sanmonitor:DB2:/TPCDB/NODE0000 NMDB2_ERROR: Unable to retrieve backup
configuration from server.
* sanmonitor:DB2:/TPCDB/NODE0000 (server = <servername>/ client =
sanmonitor.patent.gov.uk/ group = db2test)
No firewall inbetween the two servers, all ports open, I have made the database
admin and the machine administrator admins at the networker end, the correct
password is set in the client definition..
Snooping the traffic does'nt show anything useful.
Thanks in advance!
Andy
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|