Networker

[Networker] replacing a drive in an l8500, nw 7.5.0

2009-09-09 17:27:35
Subject: [Networker] replacing a drive in an l8500, nw 7.5.0
From: Rick Pim <rick AT POST.QUEENSU DOT CA>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Wed, 9 Sep 2009 17:23:06 -0400
solaris 5.10
networker 7.5.0
l8500 with 3xLTO Ultrium-3, fiber-connected

i had one of the drives in this library go bad. field service
replaced it but networker doesn't want to use it -- i'm getting
the following error logged:

Sep  9 14:10:30 backup01 root: [ID 702911 daemon.notice] NetWorker media: 
  (alert) device "/dev/rmt/2cbn": serial number mismatch, check system device
  ordering. Expected "Serial Numbers:WWNN=50060B0000599F32:
  ATNN=HP      Ultrium 3-SCSI  HU10608MDL:HU10608MDL", found 
  ":WWNN=50060B0000C30CDE:ATNN=HP      Ultrium 3-SCSI  
  MXP0932F8N:MXP0932F8N:WW2N=500104F0008FE017"

how do i tell networker that the drive has changed? i poked at it for
a while this afternoon with no luck (other than managing to 'create' a
new tape device not associated with my library that i can't delete.)

any suggestions gratefully received.

rp

rick pim                                           rick AT post.queensu DOT ca
information technology services                          (613) 533-2242
queen's university, kingston   
-----------------------------------------------------------------------
"Dead?  No excuse for laying off work."
                    -- Sir Ralph Richardson as God

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

<Prev in Thread] Current Thread [Next in Thread>