Networker

Re: [Networker] 7.4.5 - rap error, jukebox not ready.

2009-09-08 07:58:26
Subject: Re: [Networker] 7.4.5 - rap error, jukebox not ready.
From: "Khan, Sami" <sami AT ESSEX.AC DOT UK>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Tue, 8 Sep 2009 12:54:00 +0100
Thanks Frank. This only happens when I open the Mailbox door to deposit new 
tapes, we are using an ADIC Scalar 100 with three drives. Is there anyway I can 
make Networker realize when the doors are closed and bring the Scalar100 back 
to "Ready" state?

-sami





-----Original Message-----
From: Francis Swasey [mailto:Frank.Swasey AT uvm DOT edu] 
Sent: 08 September 2009 12:11
To: EMC NetWorker discussion; Khan, Sami
Subject: Re: [Networker] 7.4.5 - rap error, jukebox not ready.

On 9/8/09 5:04 AM, Khan, Sami wrote:
> 
> nsrjb: RAP error: No jukeboxes are currently usable.

This is likely related to LGTsc09318.  That fix makes NetWorker actually notice 
when the tape 
library goes into a "Not Ready" state.  The original fix (for 7.3.4 from over a 
year ago) also 
noticed within a minute of when the library became ready again.

What is the tape library you are using?  Does it make itself not ready (and 
refuse to move the 
robot) while the CAP is open -- or are you opening the doors to change tapes?

-- 
Frank Swasey                    | http://www.uvm.edu/~fcs
Sr Systems Administrator        | Always remember: You are UNIQUE,
University of Vermont           |    just like everyone else.
   "I am not young enough to know everything." - Oscar Wilde (1854-1900)

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER