But, if you are running Solaris 10, sjirdtag will only work when the
library is disabled - nsrlcpd has a lock on the jb otherwise.
-T
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Preston de Guise
Sent: Tuesday, June 09, 2009 5:21 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] How to list volume in CAP/Mail Slots
Hi Samuel,
On 10/06/2009, at 07:16 , samuel gaudre wrote:
>
> I'm looking for a command for retrieving the list of media into the
> CAP/Mail
> Slots.
> It's to verify the barcode before depositing the cartridges.
> I use NSR 7.5.1
> For the moment, I just find a command for getting the number of
> cartridge
> into the CAP.
While there's not a specific "nsrjb" style command for this, you can,
if your library/OS supports it, use the "sjirdtag" utility, which does
a lower level SCSI probe of the library.
To use sjirdtag you'd need to use the control port address (the a.b.c
part of "[email protected]"); the control port can be shown either in the
library resource in NMC when in diagnostic view, or via the output of
the "inquire" command.
sjirdtag lists library content in 4 sections:
- Content of drives
- Content of slots
- Content of robot gripper
- Content of CAP
When barcodes are used, you'll get the barcodes identified.
Cheers,
Preston.
--
Preston de Guise
"Enterprise Systems Backup and Recovery: A Corporate Insurance Policy":
http://www.amazon.com/Enterprise-Systems-Backup-Recovery-Corporate/dp/14
20076396
http://www.enterprisesystemsbackup.com
NetWorker blog: http://nsrd.wordpress.com
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|