Re: [Networker] Tape Drive Error: Label / Load / Unload
2009-03-31 17:22:21
> From: psoni <networker-forum AT BACKUPCENTRAL DOT COM>
> Reply-To: <NETWORKER AT LISTSERV.TEMPLE DOT EDU>
> Date: Tue, 31 Mar 2009 17:09:54 -0400
> To: <NETWORKER AT LISTSERV.TEMPLE DOT EDU>
> Subject: [Networker] Tape Drive Error: Label / Load / Unload
>
> Yes, i have implemented persistent binding and everything was working fine
> untill this afternoon when this problem occured.
>
> Is this a hardware issue ?
>
> We do have support for the tape library (Dell ML6000) but not for the EMC
> Networker.
>
> Do I have to reconfigure jukebox after nsrjb -HEvvv ?
It might be a hardware issue. You shouldn't need to reconfigure the tape
library after doing "nsrjb -Hevvv" but before you do that, try listing out
the contents of the jukebox and see if it matches up with what the NetWorker
console GUI says.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|