> -----Original Message-----
> From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On
> Behalf Of jasondre
> Sent: Friday, March 20, 2009 10:13 AM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: [Networker] NDMP Recover Error
> 
> 
> This is what is listed under the "Apps & Modules" of our NDMP Client
under Networker.
> 
> Backup command: nsrndmp_save -M -T dump
> 
> Application information:
> HIST=y
> UPDATE=y
> DIRECT=y
> UTF8=y
> OPTIONS=NT
> 
> That is what was setup by EMC Tech. Support.
> 
> Here is what I get when I type in the command server_devconfig
server_2 -list -scsi -
> all in a CLI on the Celerra.
> 
> server_2 :
>                Scsi Disk Table
>                                  Director   Port
> name                addr         num  type  num  sts stor_id
stor_dev
> root_disk           c0t0l0                           APM00074601519
0000
> root_disk           c16t0l0                          APM00074601519
0000
> root_ldisk          c0t0l1                           APM00074601519
0001
> root_ldisk          c16t0l1                          APM00074601519
0001
> d3                  c0t0l2                           APM00074601519
0002
> d3                  c16t0l2                          APM00074601519
0002
> d4                  c0t0l3                           APM00074601519
0003
> d4                  c16t0l3                          APM00074601519
0003
> d5                  c0t0l4                           APM00074601519
0004
> d5                  c16t0l4                          APM00074601519
0004
> d6                  c0t0l5                           APM00074601519
0005
> d6                  c16t0l5                          APM00074601519
0005
> d7                  c0t1l0                           APM00074601519
0010
> d7                  c16t1l0                          APM00074601519
0010
> d8                  c0t1l1                           APM00074601519
0011
> d8                  c16t1l1                          APM00074601519
0011
> d9                  c16t1l2                          APM00074601519
0012
> d9                  c0t1l2                           APM00074601519
0012
> d10                 c0t1l3                           APM00074601519
0013
> d10                 c16t1l3                          APM00074601519
0013
> d11                 c0t1l5                           APM00074601519
0015
> d11                 c16t1l5                          APM00074601519
0015
> d12                 c16t1l4                          APM00074601519
0014
> d12                 c0t1l4                           APM00074601519
0014
> d13                 c16t1l6                          APM00074601519
0016
> d13                 c0t1l6                           APM00074601519
0016
> 
>                Scsi Device Table
> name                addr         type  info
> ggk01               c0t1l0       disk  5 032410001000APM00074601519
> gk01                c0t0l0       disk  5 032400000000APM00074601519
> gk161               c16t1l2      disk  5 032412001200APM00074601519
> 
> I hope that makes sense to you because I'm new to all of this so that
might as well be
> in Arabic.  Is the left hand column a listing of the drives the
Celerra manages?
> 
> Also, NW is being run on a W2K3 box also.
> 
> Thanks for the help and sorry for my lack of knowledge on this
product.  I'm trying to
> learn as much as I can from this message board because we don't have
anyone in
> house with experience with this product.
> 

Understandable. I've been doing it a year and a half and still feel lost
often to be honest. From the looks of the above, you have no NDMP drives
setup on the celerra/San zone, only disks for storage. Are you using a
vtl, or physical tape library, and is it zoned in properly on the san
with the celerra? (Assuming it is Fiber-attached). Second, do you know
if the celerra is a gateway (NSG) or integrated (NSFC) version? Lastly,
what does your NDMP drive name setup in Networker gui look like? It
should have drives named something like: rd=host:c32tl0l1 , where your
"normal" tape library for non-ndmp backups will have names like
..\.\Tape0 instead. 

Regards
jamie

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER