[Networker] tape drive : service mode
2009-01-02 09:02:09
The persistent binding is set to Yes in the SANsurfer for the HBA's but
The Reserve/ Release attribute under the device's property has been set to none.
Do i have to modify it and select persistent instead of none when persistent
binding is enabled for the HBAs @ host ?
I also found that Networker release prior to 7.4 SP2 doesn't support persistent
binding configuration.
Is it mandatory to have persistent enabled for both the HBA's and in the
windows registry ?
I could see the messages about the tape drive being automatically disabled ( in
the service mode because of errors)
How do I look for SCSI specific errors ( bus resets ) on Windows server ?
+----------------------------------------------------------------------
|This was sent by soni.parth AT gmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- [Networker] tape drive : service mode,
psoni <=
|
|
|