[Networker] nsrjb -R not recycling volume in 7.4.3?

I upgraded from 7.4.1 to 7.4.3 on one of my systems (CentOS 5.2 64-bit).

Since doing so, when I try and put new tapes in the library andrelabeling them, it refuses to do so on the first try. These tapes arepreviously used but expired. When placed in the library, the libraryauto-inventories and then I can see the barcode in nsrjb, although thevolume name is listed as "-*" (this pretty much appears to be normal forthis library, and has not presented any issues in prior versions).

When I relabel the names with the "-L -Y -R" options, which alwaysworked for me previously, it now fails with:


Info: Loading volume `-' from slot `2' into device `/dev/nst0'.
Info: Operation `Verify label' in progress on device `/dev/nst0'
Info: Operation `Eject' in progress on device `/dev/nst0'
Error: Expected volume `-' in slot `2'. The actual volume is `000104L3'.
Info: Unloading volume `000104L3' from device `/dev/nst0' to slot 2.
Error: Expected volume `-' in slot `2'. The actual volume is `000104L3'.
39077:nsrjb: error, Jukebox command terminated with errors.

At that point, the volume name now shows up (but the volume is stillfull and marked recyclable), and I have to reissue the same command toactually recycle the tape...

I didn't see any new option to use with nsrjb to skip the extrastep...has anyone else seen this problem?


-Brian

To sign off this list, send email to listserv AT listserv.temple DOT edu and type 
"signoff networker" in the body of the email. Please write to networker-request 
AT listserv.temple DOT edu if you have any problems with this list. You can access the 
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER