[Networker] AW: Re: AW: tru64 client install failure

I have made the following steps.

1. stop networker daemons
nsr_shutdown
2. list installed networker packages
setld -i | grep LGTO
3. remove the installed packages
setld -d LGTOCLNTxxx LGTOMANxxx
4. install OS packages
cd to "IOSWWEURLOC540" and "DSKMOTIF21510" install dirs
setld -l .
5. install NetWorker packages
cd to NetWorker untarred install dir
setld -l .
choose LGTOCLNTxxx LGTOMANxxx
6. the install script made the right rpc and startup entries
7. you must start networker manually after install (but not on reboot)
/sbin/init.d/NSRstartstop start
ps -ef|grep nsr

The "NetWorker Release 7.4 Service Pack 1 Multiplatform Version Installation 
Guide" from powerlink describes most of the steps. If you have a Tru64 Cluster 
you must disable the new nsrauth authentication method. This is described in 
"NetWorker 7.4.1 Multiplatform Version Cluster Installation Guide".

greetings
Birk Bohne

----- "mark wragge" <mark_t_wragge AT yahoo DOT ie> schrieb:

> Thanks for this information. I have now installed the client software
> and it appeared to be successful but the client backup is failing.
>  
> I noticed that there is just one nsrexecd service listed as started
> using ps -ef | grep nsr
> I also noticed that there is no reference to nsrexecd when i run
> rpcinfo -p
>  
> On my tru64 servers running client 6.1 there are rpcinfo entries for
> networker in the rpc startup files. I copied the netries and rebooted
> the server and the rpcinfo -p now show nsrexecd running. Ps -ef | grep
> nsr shows just one nsrexecd.
>  
> Do you know if this is standard for 7.4.1 or does it look like i have
> a failed client installation?
>  
>  
> 
> 
> --- On Tue, 11/11/08, Murphy, Brendan (DBO) <Brendan.P.Murphy AT HP DOT COM>
> wrote:
> 
> From: Murphy, Brendan (DBO) <Brendan.P.Murphy AT HP DOT COM>
> Subject: Re: [Networker] AW: tru64 client install failure
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Date: Tuesday, 11 November, 2008, 6:03 PM
> 
> The products mentioned below can be found can be found on the Tru64
> V5.1B
> Associated Products CD Vol 1
> 
> The European Locale files can be loaded via the the
> World_Wide_languages
> directory (something like that anyway). Cd into the kits directory,
> and run the
> wwsinstall command, then select option 7 - European Locale, then it's
> best
> to select all optional & mandatory sets (just to be certain).
> 
> The DSKMOTIF stuff can be loaded via the Motif directory .. cd into
> the kits
> directory & run command ...
> 
> # setld -l .
> 
> And select option 2 All optional & mandatory sets.
> 
> Now your Networker client should install correctly.
> 
> 
> Kind Regards,
> Brendan Murphy,
> HP Services Software Consultant | Tru64 ASE, ITIL, RHCE | Mob: +353 87
> 2361778
> | Email : Brendan.P.Murphy AT hp DOT com
> Postal Address: Hewlett-Packard Ireland Limited, Liffey Park
> Technology Campus,
> Barnhall Road, Leixlip, County Kildare.
> Registered Office: Hewlett-Packard Ireland Limited 63-74 Sir John
> Rogerson's Quay, Dublin 2.   Registered Number: 34508
> The contents of this message and any attachments to it are
> confidential and may
> be legally privileged. If you have received this message in error, you
> should
> delete it from your system immediately and advise the sender.   To any
> recipient
> of this message within HP, unless otherwise stated you should consider
> this
> message and attachments as "HP CONFIDENTIAL".
> 
> -----Original Message-----
> From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
> On Behalf
> Of Birk Bohne
> Sent: 11 November 2008 17:24
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: [Networker] AW: tru64 client install failure
> 
> you must install the OS packages "IOSWWEURLOC540" und
> "DSKMOTIF21510".
> 
> greetings...
> 
> Birk Bohne
> Backup and Virtualization Consulting
> Erfurt, Germany
> email: birk.bohne AT batchworks DOT de
> 
> ----- "mark wragge" <mark_t_wragge AT yahoo DOT ie> schrieb:
> 
> > i am attempting to install client 7.4.3 on tru64 v5.1B but the
> > installation is failing stating that "required subset dskmotif21???
> is
> > not available"
> >
> > i do not know what is required to over come this error!
> >
> > any ideas?
> >
> > thanks, mark
> >
> > Send instant messages to your online friends
> > http://uk.messenger.yahoo.com
> >
> > To sign off this list, send email to listserv AT listserv.temple DOT edu
> and
> > type "signoff networker" in the body of the email. Please write
> to
> > networker-request AT listserv.temple DOT edu if you have any problems with
> > this list. You can access the archives at
> > http://listserv.temple.edu/archives/networker.html or
> > via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> 
> To sign off this list, send email to listserv AT listserv.temple DOT edu and
> type
> "signoff networker" in the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any problems with
> this list.
> You can access the archives at
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> 
> To sign off this list, send email to listserv AT listserv.temple DOT edu and
> type
> "signoff networker" in the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any problems with
> this list.
> You can access the archives at
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> 
> 
> Send instant messages to your online friends
> http://uk.messenger.yahoo.com
> 
> To sign off this list, send email to listserv AT listserv.temple DOT edu and
> type "signoff networker" in the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any problems with
> this list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER