EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU> wrote on
08/11/2008 02:11:29 PM:
> In regard to: Re: [Networker] Can you "scanner" a SDLT tape in a
SDLT-600...:
>
> > EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU> wrote on
> > 08/11/2008 01:02:28 PM:
> >
> >> I'm wondering .. if I have a SDLT-320 tape, can I load it into a
> > SDLT-600
> >> library, and run say "scanner -m" or "scanner -i" on it? It shiould
> > work,
> >> I think , since I am not writing to the tape.
> >
> > Apparently not .. it complained that that it knew the tape was an
> > SDLT-320, and it was in an SDLT-600 drive, and so wouldn't "scanner
-i"
> > (because it already existed in the media database).
> >
> > <SIGH>
> >
> > Suggestions?
>
> Delete it from the media database. But then when you run scanner, it
> will mark the tape as the same type as your sdlt 600 drive is configured
> as. Or you could redefine one of your SDLT-600 drives to be the type
> that matches the type your other SDLT-320 drives are defined as.
>
> The reason it's complaining is that the tape already exists in the media
> database, with a volume type of e.g. sdlt320. You're trying to scan it
> on a drive that is defined within NetWorker as some other type, e.g.
> sdlt600. NetWorker is trying to add the volume to the database but it
> can't since there's already a volume there with a different type.
Sooooo .... if I scan it on an SDLT-600 drive, I will *always* have to use
that tape in a SDLT-600 drive from now on? It's marking the tape the same
as the drive, even though the tape is *not* the same as the drive.
I don't want to redefine my SDLT-600 drives .. I need them read/write as
SDLT-600. I just (somewhat naively) assumed that I could use a SDLT-600
drive to read a SDLT-320 tape (which the hardware is capable of doing),
but apparently NetWorker is blocking me from mixing and matching tape
types.
Everywhere I turn, obstacles ...
>
> Tim
> --
> Tim Mooney Tim.Mooney AT ndsu DOT edu
> Enterprise Computing & Infrastructure 701-231-1076
(Voice)
> Room 242-J6, IACC Building 701-231-8541
(Fax)
> North Dakota State University, Fargo, ND 58105-5164
>
> To sign off this list, send email to listserv AT listserv.temple DOT edu
> and type "signoff networker" in the body of the email. Please write
> to networker-request AT listserv.temple DOT edu if you have any problems
> with this list. You can access the archives at http://listserv.
> temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|