Hello everybody,
in order to avoid the boring problem on Windows to see my devices renamed at
boot times, I implemented the Windows 2003 persistent binding. It seems to
be successful. Now, as soon as I run inquire, I'm not able to see the tape
names with inquire and, if I run from the Gui the library reconfiguration, I
receive an error and I have to run jbconfig manually.
This is the inquire output:
C:\Documents and Settings\Administrator>inquire -sl
-l flag found: searching all LUNs, which may take over 10 minutes per adapter
for some fibre channel adapters. Please be patient.
In update_scsi_bus_map: open_bus invalid on nadapters = 4
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk, \\.\PHYSICALDRIVE0
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk, \\.\PHYSICALDRIVE1
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk, \\.\PHYSICALDRIVE2
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk, \\.\PHYSICALDRIVE3
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk, \\.\PHYSICALDRIVE4
[email protected]:DGC RAID 5 0224|Disk, \\.\PHYSICALDRIVE5
[email protected]:HP Ultrium 2-SCSI F59W|Tape
[email protected]:HP Ultrium 2-SCSI F59W|Tape
[email protected]:HP NS E1200-160 5678|(Unknown Device Type c)
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk
[email protected]:DGC RAID 5 0224|Disk
[email protected]:HP NS E1200-160 568c|(Unknown Device Type c)
[email protected]:HP NS E1200-160 568c|(Unknown Device Type c)
[email protected]:HP NS E1200-160 568c|(Unknown Device Type c)
[email protected]:HP NS E1200-160 568c|(Unknown Device Type c)
[email protected]:HP MSL6000 Series 0513|Autochanger (Jukebox), \\.\Changer0
[email protected]:HP Ultrium 2-SCSI F59W|Tape
[email protected]:HP Ultrium 2-SCSI F59W|Tape
[email protected]:COMPAQ SCSI COMMUNICATECISS|Unknown Device Type
while the tapes output is as follows:
C:\Documents and Settings\Administrator>tapes
[email protected]:\\.\Tape2147483646 is <>
[email protected]:\\.\Tape2147483645 is <>
[email protected]:\\.\Tape2147483644 is <>
[email protected]:\\.\Tape2147483643 is <>
The GUI error states something about the drivers, but I have on my drives
the last drivers provided by HP.
As soon as I run a "Scan for devices" operation I receive an error like ( on
the daemon.raw file)
42506 24/06/2008 9.07.41 2 0 0 1604 1600 0 BLADE7-E2 nsrd media info:
Starting dvdetect process on host 'blade7-e2.comune.cagliari.loc'...
Unable to render the following message: In update_scsi_bus_map: open_bus
invalid on nadapters = 4
42506 24/06/2008 9.07.42 2 0 0 1604 1600 0 BLADE7-E2 nsrd media warning:
Can't create new LTO Ultrium-2 : Found new HP Ultrium 2-SCSI F59W but
cannot find device driver. Please check device driver installation.
42506 24/06/2008 9.07.42 2 0 0 1604 1600 0 BLADE7-E2 nsrd media info: No
configured libraries detected on storage node blade7-e2.comune.cagliari.loc.
Unable to render the following message: None of the methods tried returned
drive serial number information
42506 24/06/2008 9.07.42 2 0 0 1604 1600 0 BLADE7-E2 nsrd media warning: No
drive serial numbers reported by the library. Library `[email protected]' is not
auto-configured at this time.
38758 24/06/2008 9.07.42 2 0 0 1604 1600 0 BLADE7-E2 nsrd media warning:
42506 24/06/2008 9.07.42 2 0 0 1604 1600 0 BLADE7-E2 nsrd media info:
Ending dvdetect process on host
If I run a nsrjb command no problem at all to configure the librery and to
use it.
Therefore I suspect that networker v7.4.1 has some problems with microsoft
persistent binding names. I would like to know if this issue can be fixed
with a trick or something else; infact defining the library with jbconfig
having 6 storage nodes with 4 drives each in dds is a little bit boring and
you have a high probability to maek a mistake. I point out that if I use the
"normal" tape names on the windows storage nodes the scan for devices
operation works well.
Thanks a lot for any suggestion or fix
Pierpa
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
