I'm using EMC Networker v7.4.2 on Solaris 10 and I've just managed to configure
my one Silo without device sharing and it's working but when I try and
configure my 2nd Silo it completes but when you view the Silo in the GUI it is
"enabled" but not "ready".
I used the jbconfig command to configure the Silo's but I need to mention that
we have a high availability setup for the backup server such that it has a
virtual name and ip address. All services are failed over manually (using a
perl script for automation) from the one server to the other.
There are 2 office sites, JCC and RCC and 2 backup servers bsjccu01 and
bsjccu02 with 2 storage nodes per site (JCC = bsjccu02 and bsjccu03) and (RCC =
bsrccu02 and bsrccu03).
Here are the steps I used when configuring the tape silo...
CLUSTERNODE:bsjccu01:# jbconfig
cannot connect to NSR service on bsjccu01.company.co.za
39078:jbconfig: RPC error: Program not registered
If on a storage node, enter the NSR server hostname? [bsjccu01.company.co.za]
bsvitu01.company.co.za
using 'bsvitu01.company.co.za' as the NSR server
On a storage node, the hostname is a prefix to the jukebox name.
Enter the hostname to use as a prefix? [bsjccu01.company.co.za]
Using 'bsjccu01.company.co.za' as the hostname prefix
Jbconfig is running on host bsjccu01.company.co.za (SunOS 5.10),
and is using bsvitu01.company.co.za as the NetWorker server.
1) Configure an AlphaStor Library.
2) Configure an Autodetected SCSI Jukebox.
3) Configure an Autodetected NDMP SCSI Jukebox.
4) Configure an SJI Jukebox.
5) Configure an STL Silo.
What kind of Jukebox are you configuring? [1] 5
Supported Silo types for this system are:
1) ACSLS Silo (StorageTek)
2) DAS Silo (ADIC/EMASS/Grau)
3) 3494 Silo (IBM)
Enter the number corresponding to the type of silo you are installing:
Choice? 3
Installing an IBM Silo.
What name do you want to assign to this Silo device? RCCSILO
using 'rd=bsjccu01.company.co.za:RCCSILO' as Silo device name
Symbolic name of the 3494 as defined in /etc/ibmatl.conf? [libmgrc7] Libmgrrcc
Pathname of the STL library for the 3494 silo? [/usr/lib/nsr/libstlibm.so]
How many physical drives are to be configured for this silo (1 to 256)? [4] 10
The drives in this jukebox cannot be auto-configured with the available
information. You will need to provide the path for the drives.
Is (any path of) any drive intended for NDMP use? (yes / no) [no]
Is any drive going to have more than one path defined? (yes / no) [no]
Please enter the device path information in one of the following formats:
/dev/rmt/1cbn --for local path or
host:device-path --for remote node or NDMP device(s) or
host:drive-letter:directory path --for Windows disk file
For every device we configure, we're going to need the silo name as well
as the path name(s). When you are done entering the system paths for a silo
device, we will ask for the corresponding silo name. An example of the name
we need for this type of silo is: 0012500
Drive 1, element 1
Drive path ? bsjccu01.company.co.za:/dev/rmt/34cbn
Corresponding silo name value ? 00171130
Drive 2, element 2
Drive path ? bsjccu02.company.co.za:/dev/rmt/0cbn
Corresponding silo name value ? 00182620
Drive 3, element 3
Drive path ? bsjccu02.company.co.za:/dev/rmt/6cbn
Corresponding silo name value ? 00869050
Drive 4, element 4
Drive path ? bsjccu03.company.co.za:/dev/rmt/25cbn
Corresponding silo name value ? 00871960
Drive 5, element 5
Drive path ? bsjccu03.company.co.za:/dev/rmt/26cbn
Corresponding silo name value ? 00871100
Drive 6, element 6
Drive path ? bsrccu01.company.co.za:/dev/rmt/26cbn
Corresponding silo name value ? 00872290
Drive 7, element 7
Drive path ? bsrccu02.company.co.za:/dev/rmt/20cbn
Corresponding silo name value ? 00871320
Drive 8, element 8
Drive path ? bsrccu02.company.co.za:/dev/rmt/8cbn
Corresponding silo name value ? 00872260
Drive 9, element 9
Drive path ? bsrccu03.company.co.za:/dev/rmt/39cbn
Corresponding silo name value ? 00871290
Drive 10, element 10
Drive path ? bsrccu03.company.co.za:/dev/rmt/38cbn
Corresponding silo name value ? 00872500
Please select the appropriate drive type number:
1) 3480 24) 9840b 47) optical
2) 3570 25) 9840C 48) qic
3) 3590 26) 9940 49) SAIT-1
4) 3592 27) 9940B 50) SD3
5) 4890 28) adv_file 51) sdlt
6) 4mm 29) dlt 52) sdlt320
7) 4mm 12GB 30) dlt vs160 53) sdlt600
8) 4mm 20GB 31) dlt-s4 54) SLR
9) 4mm 4GB 32) dlt-v4 55) T10000
10) 4mm 8GB 33) dlt1 56) tkz90
11) 4mm DAT160 34) dlt7000 57) travan10
12) 4mm DAT72 35) dlt8000 58) TS1120
13) 8mm 36) dst 59) tz85
14) 8mm 20GB 37) dst (NT) 60) tz86
15) 8mm 5GB 38) dtf 61) tz87
16) 8mm AIT 39) dtf2 62) tz88
17) 8mm AIT-2 40) file 63) tz89
18) 8mm AIT-3 41) himt 64) tz90
19) 8mm AIT-4 42) logical 65) tzs20
20) 8mm AIT-5 43) LTO Ultrium 66) VXA
21) 8mm Mammoth-2 44) LTO Ultrium-2 67) VXA-172
22) 9490 45) LTO Ultrium-3 68) VXA-2
23) 9840 46) LTO Ultrium-4 69) VXA-320
Enter the drive type of drive 1? 4
Are all the drives the same model? (yes / no) [yes]
Jukebox has been added successfully
The following configuration options have been set:
> Silo software managed tape autocleaning on.
> Barcode reading to on because this is a silo.
> Volume labels that match the barcodes.
You can review and change the characteristics of the autochanger and its
associated devices using the NetWorker Management Console.
Would you like to configure another jukebox? (yes/no) [no]
0; bsjccu010:0:0 /
CLUSTERNODE:bsjccu01:#
+----------------------------------------------------------------------
|This was sent by allan.swanepoel AT za.didata DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
