You might be better off just using nsrmm to mount the tape in a drive
like you would with a non-jb drive.
If you can use sjimm - you can move the tape into a drive and then just
run nsrmm -m -f /dev/xxx - if you have trouble doing that then maybe you
could delete the jukebox resource and try it again
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Randy Doering
Sent: Friday, 25 April 2008 7:14 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Recover after Retirement - Volumes Leaving
Media DB
----- Original Message ----
From: A Darren Dunham <ddunham AT TAOS DOT COM>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Sent: Thursday, April 24, 2008 3:08:04 PM
Subject: Re: [Networker] Recover after Retirement - Volumes Leaving
Media DB
On Thu, Apr 24, 2008 at 02:26:57PM -0400, Randy Doering wrote:
> This time, Networker sees the tapes loaded, online via nsrjb, after
nsrjb -
> I -S. Now when I kicked off the restore it says it needs tape 000068,
and
> tape 000068 is loaded in the LTO3 drive. But Networker continues to
> request for this tape to be loaded until it times out with the
following
> in the daemon.log file:
>
> 04/24/08 13:16:16 nsrd: Operation 2 started : Load volume `000068'.
> 04/24/08 13:16:16 nsrd: media waiting event: waiting for LTO Ultrium-3
> tape 000068 on a11ns01
> 04/24/08 13:25:49 nsrd: [Jukebox `nsr_juke', operation # 2]. Expected
> volume `000068' in slot `8'. The actual volume is `<NULL>'.
> 04/24/08 13:31:16 nsrd: media critical event: waiting for LTO
Ultrium-3
> tape 000068 on a11ns01
>> Can you mount that volume manually with nsrjb?
Actually, I can't. Specifying both the Slot and just the Volume gives
me:
nsrjb -l 000068
nsrjb: Error: Cannot allocate 1 devices needed for Load operation,
number of available and usable devices = 0
nsrjb: error, Jukebox command terminated with errors.
[root@b2u32]/nsr/logs>nsrjb -l -S 8
nsrjb: Error: Cannot allocate 1 devices needed for Load operation,
number of available and usable devices = 0
nsrjb: error, Jukebox command terminated with errors.
nsrjb -l 000068 -f /dev/nst9
nsrjb: Error: Device `/dev/nst9' is not available.
nsrjb: error, Jukebox command terminated with errors.
I was previously able to inventory using: nsrjb -v -I -S 8 -f /dev/nst9
and that worked.
The recover does send the tape to the drive, but guess it's not actually
"loading" it. Rerun jbconfig?
Thanks for the tip. Just shutdown Networker and brought up Netbackup for
the nights backups.
Randy
--
Darren Dunham ddunham AT taos DOT com
Senior Technical Consultant TAOS http://www.taos.com/
Got some Dr Pepper? San Francisco, CA bay area
< This line left intentionally blank to confuse you. >
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
NOTICE
This e-mail and any attachments are confidential and may contain copyright
material of Macquarie Group Limited or third parties. If you are not the
intended recipient of this email you should not read, print, re-transmit, store
or act in reliance on this e-mail or any attachments, and should destroy all
copies of them. Macquarie Group Limited does not guarantee the integrity of any
emails or any attached files. The views or opinions expressed are the author's
own and may not reflect the views or opinions of Macquarie Group Limited.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
