Hi,
We'd like to get SAS interface for LTO-4 drives in a new library.
Haven't decided yet on the library, but most list
with SCSI or FC. I see the following on Legato's Hardware Compatibility
guide:
"With SAS, our main concern is the HBA and HBA driver. We are still in
the early days of SAS deployment, and we prefer to err on the
side of caution. Until we have built up enough confidence with SAS HBAs
and drivers on the various platforms that we support, we are
going to require that any SAS storage device be qualified with a
specific SAS HBA, preferable one that we have already qualified
devices on."
Does anyone know what the qualified devices are?
George
--
George Sinclair - NOAA/NESDIS/National Oceanographic Data Center
SSMC3 4th Floor Rm 4145 | Voice: (301) 713-3284 x210
1315 East West Highway | Fax: (301) 713-3301
Silver Spring, MD 20910-3282 | Web Site: http://www.nodc.noaa.gov/
- Any opinions expressed in this message are NOT those of the US Govt. -
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
