Afer removing the SN from the NWS, and running jbconfig on the SN in Site2
(rap05c) again:
C:\Documents and Settings\Administrator>inquire
[email protected]:SlimtypeDVDRW SSW-8015S HGS4|CD-ROM
[email protected]:LSI MegaRAID 8308ELP1.03|Disk
S/N: 0051f204942787610e00944a00b00506
WWNN=600605B0004A94000E6187279404F251
[email protected]: RAID DummyDevice 0001|Unknown Device Type
[email protected]:IBM ULTRIUM-TD3 6B20|Tape, \\.\Tape0
S/N: 1210307630
ATNN=IBM ULTRIUM-TD3 12103076
30
WWNN=500308C09C356000
WWPN=500308C09C356001
PORT=00000001
[email protected]:IBM ULTRIUM-TD3 6B20|Tape, \\.\Tape1
S/N: 1210307931
ATNN=IBM ULTRIUM-TD3 12103079
31
WWNN=500308C09C356004
WWPN=500308C09C356005
PORT=00000001
[email protected]:ADIC Scalar i500 400G|Autochanger (Jukebox), \\.\Changer0
S/N: ADICA0C0187729_LLA
ATNN=ADIC A0C0187729_LLA
C:\Documents and Settings\Administrator>
C:\Documents and Settings\Administrator>jbconfig -s rap05h
Jbconfig is running on .....omitted for space..
The following drive(s) can be auto-configured in this jukebox:
1> LTO Ultrium-3 @ 7.0.0 ==> \\.\Tape0
2> LTO Ultrium-3 @ 7.1.0 ==> \\.\Tape1
These are all the drives that this jukebox has reported.
To change the drive model(s) or configure them as shared or NDMP drives,
you need to bypass auto-configure. Bypass auto-configure? (yes / no) [no] n
Jukebox has been added successfully
The following configuration options have been set:
> Jukebox description to the control port and model.
> Autochanger control port to the port at which we found it.
> Autocleaning off.
> Barcode reading to on.
> Volume labels that match the barcodes.
You can review and change the characteristics of the autochanger and its
associated devices using the NetWorker Management Console.
Would you like to configure another jukebox? (yes/no) [no]n
C:\Documents and Settings\Administrator>
I then went back on the NWS to configure the new SN in the library, which
appeared to work fine. Yet even though I could now see the tapes that are in
the jukebox, when I went to inventory those tapes in Tape0 (it takes becuase I
see the entry nsrd [Jukebox `rd=rap05c:ClassPA', operation 13]. Initiated
operation `operation: "Inventory"; operation slots: "1-120"; '., I keep seeing
the message in the log section in the console:
nsrmmgd Jukebox `rd=rap05c:ClassPA' is unavailable. nsrlcpd is not running for
this jukebox
:-(
So, for grins, I edited the servers file in a client in Site2 (rap01c), to
include the NWS in it (rap05h, it already has it's SN already in it), and on
the NWS I created a TestGroup to include only the client in it and tried to run
it, after it started, I saw these last few entries in the daemon.raw on the NWS:
nsrd savegroup info: starting TestGroup (with 1 client(s))
savegrp command ' savefs -s rap05h.microshaft.com -c rap01c -g TestGroup -p -l
full -R -v
-F "c:\temp"' for client rap01c exited with return code 1.
savegrp job (10) host: rap01c savepoint: rap01c:Probe had SEVERE indication(s)
at completion.
nsrd rap05h.microshaft.com:index:rap01c saving to pool 'Default' (NYU000)
nsrd rap05h.microshaft.com:index:rap01c done saving to pool 'Default' (NYU000)
nsrd savegroup info: Added 'rap05h.microshaft.com' to the group 'TestGroup' for
bootstrap backup.
nsrd rap05h.microshaft.com:bootstrap saving to pool 'Default' (NYU000)
nsrmmdbd media db is saving its data. This may take a while.
nsrd rap05h.microshaft.com:bootstrap done saving to pool 'Default' (NYU000) 206
KB
nsrd savegroup failure alert: TestGroup Completed/Aborted, Total 2 client(s), 0
Clients disabled, 0 Hostname(s) Unresolved, 1 Failed, 1 Succeeded. TestGroup
completed, Total 2 client(s), 1 Failed, 1 Succeeded. Please see group
completion details for more information. Failed: rap01c Succeeded:
rap05h.microshaft.com saveset rap01c:rap01c:index: percentage of inactive
files by count: 0.00, by space: 0.00 saveset
rap05h.microshaft.com:rap05h.microshaft.com:bootstrap: percentage of inactive
files by count: 0.00, by space: 0.00 Start time: Thu Dec 20 15:07:35 2007
End time: Thu Dec 20 15:07:39 2007 --- Never Started Save Sets ---
savegrp: rap01c:c:
nsrd savegroup alert: TestGroup completed, Total 2 client(s), 1 Failed, 1
Succeeded. Please see group completion details for more information. Failed:
rap01c Succeeded: rap05h.microshaft.com saveset rap01c:rap01c:index:
percentage of inactive files by count: 0.00, by space: 0.00 saveset
rap05h.microshaft.com:rap05h.microshaft.com:bootstrap: percentage of inactive
files by count: 0.00, by space: 0.00 Start time: Thu Dec 20 15:07:35 2007
End time: Thu Dec 20 15:07:39 2007 --- Never Started Save Sets ---
savegrp: rap01c:c:
nsrd runq: NSR group TestGroup exited with return code 1.
nsrd write completion notice: Writing to volume NYU000 complete
nsrmmgd Started nsrlcpd on host `rap05c' with command line options '-s
rap05h.microshaft.com -N 1 -n 11 '.
nsrd [Jukebox `rd=rap05c:ClassPA', operation 13]. Initiated operation
`operation: "Inventory"; operation slots: "1-120"; '.
nsrmmgd Jukebox `rd=rap05c:ClassPA' is unavailable. nsrlcpd is not running for
this jukebox.
nsrd [Jukebox `rd=rap05c:ClassPA', operation # 13]. Finished with status:
retryable
nsrmmgd Started nsrlcpd on host `rap05c' with command line options '-s
rap05h.microshaft.com -N 1 -n 12 '.
......Hmmm, I'm confused, what is the problem???
+----------------------------------------------------------------------
|This was sent by angelohl AT hotmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
