Re: [Networker] nsrjb when drives are connected to ndmp host

I just tried with one of our ndmp host:

nsrjb -l -n -f "rd=NDMPHOST:nrst0a" 100162

You have to check how the drive is configured. nsrjbdevs should give you
all information of the device naming.
You can also have a look into the device ressource.

Regards
Andreas

-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Werth, Dave
Sent: Monday, October 15, 2007 7:43 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] nsrjb when drives are connected to ndmp host

Vernon,

It's been a long time since I've used nsrjb and when I did I only used
it for labeling tapes and occasionally dismounting tapes.

But in looking at your command and the "man" page for nsrjb you haven't
specified the -j option that names the jukebox you will be using.  Here
is a line from one of the scripts I used for labeling tapes in the past.
This was on Solaris and the version of Networker was probably 5 or 6.

        nsrjb -L -Y -j IIMjb0 -b "IIM Exchange" -S1 IIM.Exch.8800

I'm afraid that's the extent of my experience with nsrjb.  Hope this
helps,

Dave

David Werth
Garmin AT, Inc
Salem, Oregon
dave.werth<at>garmin.com

-----Original Message-----
From: Vernon Harris [mailto:harriv00 AT yahoo DOT com] 
Sent: Monday, October 15, 2007 10:20 AM
To: Werth, Dave
Subject: RE: [Networker] nsrjb when drives are connected to ndmp host

Dave,
Would you mind please send me the exact syntax that
you use to perform this task??

Thanks
--- "Werth, Dave" <dave.werth AT garmin DOT com> wrote:

> Vernon,
> 
> Using the jukebox name as it appears in the
> Networker GUI always worked
> for me.
> 
> David Werth
> Garmin AT, Inc
> Salem, Oregon
> dave.werth<at>garmin.com
> 
> -----Original Message-----
> From: EMC NetWorker discussion
> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
> Behalf Of Vernon Harris
> Sent: Monday, October 15, 2007 8:32 AM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: [Networker] nsrjb when drives are connected
> to ndmp host
> 
> I need to verify drive ordering and I'm having
> difficulty using nsrjb to
> mount and unload a tape in each drive.  Does anyone
> know the correct
> syntax.  
> The library is connected to the networker server and
> the drives are
> connected to the ndmp host.  Have used the following
> command with no
> luck.
> 
> nsrjb -l -f c4 000008L3
> nsrjb: error, Cannot find any jukebox with a device
> named `c4'.
> 
> # nsrjb -l -f ndmphostname:/dev/rmt/64 000008L3
> nsrjb: error, Cannot find any jukebox with a device
> named
> `ndmphostname:/dev/rmt/64'.
> 
> # nsrjb -l -f rd=ndmphostname:/dev/rmt/64 000008L3
> nsrjb: error, Cannot find any jukebox with a device
> named
> `rd=ndmphostname:/dev/rmt/64'.
> 
> # nsrjb -l -f /dev/rmt/64 000008L3 
> 
> Please help
> 
> To sign off this list, send email to
> listserv AT listserv.temple DOT edu and
> type "signoff networker" in the body of the email.
> Please write to
> networker-request AT listserv.temple DOT edu if you have
> any problems with this
> list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html
> or
> via RSS at
>
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> 
> ------------------------- 
> This e-mail and any attachments may contain
> confidential material for the sole use of the
> intended recipient.  If you are not the intended
> recipient, please be aware that any disclosure,
> copying, distribution or use of this e-mail or any
> attachment is prohibited.  If you have received this
> e-mail in error, please contact the sender and
> delete all copies. 
> Thank you for your cooperation 
> 
> 



       
________________________________________________________________________
____________
Building a website is a piece of cake. Yahoo! Small Business gives you
all the tools to get online.
http://smallbusiness.yahoo.com/webhosting 

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER