[Networker] drive loaded and the drive status is `not occupied'
2007-10-01 12:13:34
Hope someone can help me with this one, here is my config first
Networker 7.32 on windows
STK SL8500 library with 22 LTO drives
mounts and dismounts are controlled by the mainframe.
We connect via libattach to libstation ( this is ACSLS for mainframe)
here is the issue:
in legato we try to unmount a tape that is bad and is stuck in the drive, that
process fails, on the mainframe side the operators run an eject command to the
drive and are able to remove the tape, at this point legato belives that the
tape is still in the drive.
In my case i need it to restart the legato services, as soon as i did that here
is the error
Invalid update on jukebox ? slot 59 is loaded in drive ?0,2,1,3?, drive status
is not occupied.the library on reboot disables itself
after many hours with legato tech the final solution was to run a jbconfig, has
anyone else had a similar issue? is there a way via nsradmin to tell legato
that the drive is empty and force an update of it's database?
any help would be appriciated
this is the second time in 2 months i had to do this
+----------------------------------------------------------------------
|This was sent by 2capi AT optonline DOT net via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] drive loaded and the drive status is `not occupied',
Capi <=
|
|
|