Would anyone know the command to get the jukebox to recognize a cleaning
tape?
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Peter Viertel
Sent: Thursday, June 07, 2007 8:22 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker]
Tapes being marked full prematurely are often to do with networker
seeing SCSI errors - you don't give any details of the SCSI config,
but if you added that tape drive to the same chain as the other drive
then you may have one of:
* new drive has faulty scsi interface.
* total cable length of the chain is now longer than allowable. (eg 6m
for SE scsi).
* terminator is on crooked, or has a bent pin.
* cables have bent pins or are not plugged in firmly.
I believe you can download some diagnostics software from quantum for
SDLT drives, but it's usually something simple like a bent pin
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Terveen, Frank
Sent: Friday, 8 June 2007 5:29 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker]
EMC wont sent any timely support so let's see what happens if I post
this here
I have a problem with SDLT tapes being used for 1 to max 10 % of their
capacity (even if the tapes are brand new)
My site consists of 2 CX500 San's in mirror with a MSL5026 taperobot
This problem started one week after adding a second tape unit to the
robot The second tape unit had initial SCSI numbering problems but that
was fixed withing an hour I am running all this on Networker 7.1.2 and
Windows 2000/2003 servers
Now it seems that the tapes are not fully being used Any Help or idea is
welcom
met vriendelijke groeten, / With kind regards, Frank Terveen Senior
Systeembeheerder / Senior Systems Manager Afdeling
Gebruikersondersteuning Informatiesystemen / Information Systems
Division
Disclaimer:
http://www.afm.nl/disclaimer
http://www.afm.nl/disclaimer_english/
Indien u de link niet kunt openen, neemt u dan contact op met
telefoonnummer +31 (0)20 7972000. Meer informatie vindt u op de website
http://www.afm.nl.
If you are unable to access the link, please dial +31 (0)20 7972000
Additional information is available on the website http://www.afm.nl.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
NOTICE
This e-mail and any attachments are confidential and may contain
copyright material of Macquarie Bank or third parties. If you are not
the intended recipient of this email you should not read, print,
re-transmit, store or act in reliance on this e-mail or any attachments,
and should destroy all copies of them. Macquarie Bank does not guarantee
the integrity of any emails or any attached files. The views or opinions
expressed are the author's own and may not reflect the views or opinions
of Macquarie Bank.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
______________________________________________________________________
The information in this email (including any attachments) is confidential and
may be legally privileged. Access to this e-mail by anyone other than the
intended addressee is unauthorized. If you are not the intended recipient of
this message, any review, disclosure, copying, distribution, retention, or any
action taken or omitted to be taken in reliance on it (including any
attachments) is prohibited and may be unlawful. If you are not the intended
recipient, please reply to or forward a copy of this message to the sender and
delete the message, all attachments, and any copies thereof from your system
and destroy any printout thereof.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
