Thanks Tim. You're a legend. That's been killing me for sometime as it
turns out without me realising it....
I have found !full doesn't work in 7.2.2.Build.494 either. But
%used<full does.
Here's a little matrix of how they work on my different versions:
7.2.1.311 both give the same results.
7.2.2.422 both give the same results.
7.2.2.494 !full broken, %used<full works.
7.3.2.386 !full broken, %used<full works.
I think, just because I like wasting my days, that I shall log a
powerlink case.
> -----Original Message-----
> From: EMC NetWorker discussion
> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Tim Nicholson
> Sent: Wednesday, 1 August 2007 8:41 AM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: Re: [Networker] mminfo question
>
> That does not work on some versions of 7.3
>
> I used to use that, but with 7.3 it broke. I now use
>
> %used<full
>
> to get the same effect.
>
>
> On 01/08/2007, at 7:48 AM, George Sinclair wrote:
>
> > Eureka! Sheesh! I didn't realize it was going to be that easy. :-)
> >
> > Davina Treiber wrote:
> >> George Sinclair wrote:
> >>> Is there a way I can specify not '%used=full' with mminfo?
> >>>
> >>> I want to see all volumes in a particular pool that are still
> >>> appendable. I know I can used '%used<=100', or I can pipe it to
> >>> something like: grep -v " full ". Just curious if there was
> >>> some way to use '!%used=full', but that doesn't work, nor does '%
> >>> used!=full'.
> >>
> >> mminfo -q "pool=mypool,!full"
> >>
> >> To sign off this list, send email to listserv AT listserv.temple DOT edu
> >> and type "signoff networker" in the body of the email. Please
> >> write to networker-request AT listserv.temple DOT edu if you have any
> >> problems with this list. You can access the archives at http://
> >> listserv.temple.edu/archives/networker.html or
> >> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> >>
> >
> >
> > --
> > George Sinclair - NOAA/NESDIS/National Oceanographic Data Center
> > SSMC3 4th Floor Rm 4145 | Voice: (301) 713-3284 x210
> > 1315 East West Highway | Fax: (301) 713-3301
> > Silver Spring, MD 20910-3282 | Web Site: http://www.nodc.noaa.gov/
> > - Any opinions expressed in this message are NOT those of the US
> > Govt. -
> > To sign off this list, send email to listserv AT listserv.temple DOT edu
> > and type "signoff networker" in the body of the email.
> Please write
> > to networker-request AT listserv.temple DOT edu if you have any problems
> > with this list. You can access the archives at http://
> > listserv.temple.edu/archives/networker.html or
> > via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
> To sign off this list, send email to
> listserv AT listserv.temple DOT edu and type "signoff networker" in
> the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any
> problems with this list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
NOTICE
This e-mail and any attachments are confidential and may contain copyright
material of Macquarie Bank or third parties. If you are not the intended
recipient of this email you should not read, print, re-transmit, store or act
in reliance on this e-mail or any attachments, and should destroy all copies of
them. Macquarie Bank does not guarantee the integrity of any emails or any
attached files. The views or opinions expressed are the author's own and may
not reflect the views or opinions of Macquarie Bank.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
