No. NSRStage is used to move SSID from a pool to another one,
not for duplicating volumes.
You probably mean "nsrclone" that is right command to look at.
Do not forget and keep in mind nsrclone is neither a
"volume duplicate" command :
as networker allows you to clone from/to different mediums,
duplicate operation is extracting source ssid from media
and copy it to target volume.
So, it is absolutely not a physical copy by a logical copy.
Th
Kind regards - Bien cordialement - Vriendelijke groeten,
Thierry FAIDHERBE
HP Services - Storage Division
Tru64 Unix and Legato Enterprise Backup Solutions Consultant
********* ********* HEWLETT - PACKARD
******* h ******* - 1 Rue de l'aeronef/Luchtschipstraat
****** h ****** 1140 Bruxelles/Brussel/Brussels
***** hhhh pppp ***** - 102 Blv de la Woluwe/Woluwedal
***** h h p p ***** 1200 Bruxelles/Brussel/Brussels
***** h h pppp ***** -> HP moves as from 20 August 2007
****** p ****** Hermeslaan 1a - B-1831 Diegem
******* p ******* BELGIUM
********* *********
Phone : +32 (0)2 / 729.85.42
I N V E N T Mobile : +32 (0)498/ 94.60.85
Fax : +32 (0)2 / 729.88.30
Enterprise number 0402.220.594 Email/MSN : thierry.faidherbe(at)hp.com
RPM/RPR Brussels Internet : http://www.hp.com/
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Wood, R A (Bob)
Sent: mercredi 27 juin 2007 1:28
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] How to duplicate tapes
Vernon,
Using networker to do this you would use nsrstage (you can read
manual for full description) here's one way to do it.
mminfo -s servername -q "SSID" -r"volume=volumename1,
volume=volumename2,volume=volumaneme3"
This gives a list of savesets on those volumes (you can be fancy and
check flags so you son't get orphaned heads, middles, or tails but, by
leaving them in Networker will reinflate the saveset to copy it so be
prepared for other tapes to be used)
Having your list of SSIDs you can save them to a file for input into the
nsrstage command or pipe them directly
Nsrstage -s servername -v -b pool -m -S -f filename
(the -f filename is for when you've saved the SSID list, I find this
handy for doing cross check to make sure all is copied)
Other methods include using third party software/devices and I have no
experience of those (by using networker you can use either tape in
networker and it won't complain...)
Regards
Bob
Bob Wood
Senior Technical Analyst
ITC - EMEAE London eHub
Chevron Limited
1 Westferry Circus, Canary Wharf
London, E14 4HA
Tel +44(0)20 7719 3885
Fax +44(0)20 7719 5101
woodr AT chevron DOT com
Chevron Limited. Registered in England and Wales (145197). Registered
office 1 Westferry Circus, Canary Wharf, London, England, E14 4HA
>-----Original Message-----
>From: EMC NetWorker discussion
>[mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Vernon Harris
>Sent: 26 June 2007 16:07
>To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
>Subject: [Networker] How to duplicate tapes
>
>Is there anyone out there that knows how to duplicate tapes
>automatically. Meaning, what's the easiest way to duplicate
>several tapes. Is there a command line procedure to do this
>which can be scripted?
>
>Thanks
>
>
>
>_______________________________________________________________
>_____________________
>TV dinner still cooling?
>Check out "Tonight's Picks" on Yahoo! TV.
>http://tv.yahoo.com/
>
>To sign off this list, send email to
>listserv AT listserv.temple DOT edu and type "signoff networker" in
>the body of the email. Please write to
>networker-request AT listserv.temple DOT edu if you have any problems
>with this list. You can access the archives at
>http://listserv.temple.edu/archives/networker.html or via RSS
>at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|