Networker

Re: [Networker] inqure & jbconfig not working in Solaris 9/10

2007-05-29 15:34:08
Subject: Re: [Networker] inqure & jbconfig not working in Solaris 9/10
From: Yaron Zabary <yaron AT ARISTO.TAU.AC DOT IL>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Tue, 29 May 2007 22:31:50 +0300
Curtis Preston wrote:
That's only for Sun StorEdge cards/drivers.  I'm using an Emulex LP8000
and  a Qlogic QLA 2200.  I figured what the heck and ran it anyway and
got:
 Funny, both HBA's are in the stock 7.2.2 lus.conf, so my previous
answer is probably irrelevant.
  What does inquire show ?

  What does lusbinfo show ?

  Did you run devfsadm or tapes ?

# lus_add_fp_devs

                Updating /usr/kernel/drv/lus.conf

        No CONNECTED Sun StorEdge(TM) HBA ports found with luxadm -e
port
           This script is only used to configure lus to allow access
           to devices connected through Sun StorEdge(TM) Fibrechannel
HBAs

---
W. Curtis Preston
Author of O'Reilly's Backup & Recovery and Using SANs and NAS
VP Data Protection
GlassHouse Technologies

-----Original Message-----
From: Landwehr, Jerome [mailto:jlandweh AT harris DOT com] Sent: Tuesday, May 29, 2007 11:51 AM
To: EMC NetWorker discussion; Curtis Preston
Subject: RE: [Networker] inqure & jbconfig not working in Solaris 9/10

not sure if this is the answer for your issue, but I often have to run
lus_add_fp_devs for solaris NW servers
Jerry

-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Curtis Preston
Sent: Tuesday, May 29, 2007 2:38 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] inqure & jbconfig not working in Solaris 9/10

I'm trying to configure NetWorker on three test machines where we JUST
previously had NBU installed and running fine.  They can all see a Fibre
Channel attached VTL that's pretending to be ATL P1000 with 8 9840C
drives in it.  NBU configured this and used it NO PROBLEM.

We UNinstalled NBU and made sure the sg driver was gone. Now we're
trying to install NW, and it's giving us fits.  It configures just FINE
on the RedHat Enterprise Linux server, but it won't configure on the
Solaris 9 or 10 box.
On both systems, I can see the proper number of devices in
/dev/scsi/changer and /dev/scsi/sequential, but...

On Solaris 9, it lists 64 different instances of the robot device, and
on Solaris 10 it lists NONE.
I even tried manually configuring them using the device I can see in the
/dev/scsi/changer, and it says it sees no robot there.  What's up with
THAT?

HELP!!!

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and type 
"signoff networker" in the body of the email. Please write to networker-request 
AT listserv.temple DOT edu if you have any problems with this list. You can access the 
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and type 
"signoff networker" in the body of the email. Please write to networker-request 
AT listserv.temple DOT edu if you have any problems with this list. You can access the 
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER