[Networker] inqure & jbconfig not working in Solaris 9/10
2007-05-29 14:41:53
I'm trying to configure NetWorker on three test machines where we JUST
previously had NBU installed and running fine. They can all see a Fibre
Channel attached VTL that's pretending to be ATL P1000 with 8 9840C
drives in it. NBU configured this and used it NO PROBLEM.
We UNinstalled NBU and made sure the sg driver was gone. Now we're
trying to install NW, and it's giving us fits. It configures just FINE
on the RedHat Enterprise Linux server, but it won't configure on the
Solaris 9 or 10 box.
On both systems, I can see the proper number of devices in
/dev/scsi/changer and /dev/scsi/sequential, but...
On Solaris 9, it lists 64 different instances of the robot device, and
on Solaris 10 it lists NONE.
I even tried manually configuring them using the device I can see in the
/dev/scsi/changer, and it says it sees no robot there. What's up with
THAT?
HELP!!!
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] inqure & jbconfig not working in Solaris 9/10,
Curtis Preston <=
|
|
|