I set up multiple data zones with LTOIII and they were only at 7.2.2

I know 7.1.2 would *not* work with LTOIII but saying you *have to* go to
7.3.2 - that's just silly!

jl 

-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Albert Eddie Contractor AFRPA CIO/IT
Sent: Wednesday, November 01, 2006 5:15 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] LTO-3 Drives?

According to EMC only upto LTO-2. /ALE

> -----Original Message-----
> From: EMC NetWorker discussion 
> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Thomas, Tim
> Sent: Wednesday, November 01, 2006 5:12 PM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: Re: [Networker] LTO-3 Drives?
> 
> What?
> 
> So, what type of support is there in 7.2.2? 
> 
> -----Original Message-----
> From: EMC NetWorker discussion 
> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Albert 
> Eddie Contractor AFRPA CIO/IT
> Sent: Wednesday, November 01, 2006 4:10 PM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: [Networker] LTO-3 Drives?
> 
> EMC Tech Support just told me that it is MANDATORY to upgrade 
> to 7.3.2 for LTO-3 (compression) drive support.
> 
> Hmmm.... /ALE
> 

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER