Networker
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Networker] NETAPP_NDMP\DDS & Devices Problems

2006-09-07 10:05:05
Subject: Re: [Networker] NETAPP_NDMP\DDS & Devices Problems
From: Itzik Meirson <imeirson AT BEZEQINT DOT NET>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Thu, 7 Sep 2006 17:00:05 +0300 
The device names for the netapp should be nrstXa.
Your jukebox configuration seems to be correct.
Verify that the pool selected is allowed to use the devices on the
netapp(s). Also verify that you have specified the proper storage node in
the netapps client configuration.
Itzik

-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Fazil Saiyed
Sent: Thursday, 07 September, 2006 16:42
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] NETAPP_NDMP\DDS & Devices Problems

Hello,
I have Netapp Filer FAS3050 that needs to be configured with DDS\NDMP, 
After much Testing i was able to zone and assign 2 Tape drives to Filer 
and they are being Seen, however, when i configured the Legato ( 7.2.1 
with Windows 2003\LTO2) backup complains about not avallble pools and 
Devices, jbconfig output is below, i have checked and made sure all the 
pools and devices are avallable and configured, my question is wheather i 
used correct Device syntex when running jbconfig.
inquire-N does not report back, Tape lib is Adic i2K, and seems to be 
working fine, i am able to mount the tape from the Networker server in the 
remote netapp device, however no NDMP backups are occouring.
Please let me know if you have any written procedures with 
Netapp\Legato\jbconfig for NDMP.
Storagenode1 is storagenode1
cor1s015 is primary backup server
netapp01b is netapp clusterb
Questions: for LTO2 what device type i should use to configure jbconfig
&amp; 
wheather my device name syntex is correct or not
 rst2a  -  rewind device,        format is: LTO-II tape 400GB cmp
 nrst2a -  no rewind device,     format is: LTO-II tape 400GB cmp
 urst2a -  unload/reload device, format is: LTO-II tape 400GB cmp
should i use Deive alieas for netapp or NOT ?

D:\nsr\bin>jbconfig
         1) Configure an AlphaStor/SmartMedia Jukebox.
         2) Configure an Autodetected SCSI Jukebox.
         3) Configure an Autodetected NDMP SCSI Jukebox.
         4) Configure an SJI Jukebox.
         5) Configure an STL Silo.
         6) Configure a Microsoft Removable Storage Jukebox.

What kind of Jukebox are you configuring? [1] 2
Installing 'Standard SCSI Jukebox' jukebox - [email protected].

What name do you want to assign to this jukebox device? ADIC
Turn NetWorker auto-cleaning on (yes / no) [yes]? y
The drives in this jukebox cannot be auto-configured with the available
 information. You will need to provide the path for the drives.

Is (any path of) any drive intended for NDMP use? (yes / no) [no] y
Is any drive going to have more than one path defined? (yes / no) [no] y

You will be prompted for multiple paths for each drive.
Pressing <Enter> on a null default advances to the next drive.


Please enter the device path information in one of the following formats:

        \\.\Tape0 --for local path or
        host:device-path --for remote node or
        host:drive-letter:directory path --for Windows disk file

   After you have entered a device path, you will be prompted for an NDMP
user name for that path's host. If this device path is not an NDMP device,
press the enter key to advance to the next device path.  For NDMP devices,
you need to enter the user name and password the first time we encounter
that NDMP host. Pressing the enter key for the NDMP user name for any
subsequent device path on the same host will set the user name and password
to those defined the first time. You will not be prompted for the password
in such a case.

Drive  1, element 256
Device path 1 ? \\.\Tape0
     Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ? storagenode1:\\.\Tape0
     Enter NDMP user name for host 'storagenode1'?
Device path 3 ?

Drive  2, element 257
Device path 1 ? \\.\Tape1
     Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ? storagenode1:\\.\Tape1
     Enter NDMP user name for host 'storagenode1'?
Device path 3 ? \\.\Tape2
     Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 4 ?

Drive  3, element 258
Device path 1 ? \\.\Tape2
     Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
You've already used that path name for Device 2 Path 3 .
                                        Please choose another pathname.
Device path 1 ?
Device path 1 ?
Device path 1 ?
Device path 1 ?
Device path 1 ? I/O error or End of File encountered.  Exiting.

D:\nsr\bin>jbconfig
         1) Configure an AlphaStor/SmartMedia Jukebox.
         2) Configure an Autodetected SCSI Jukebox.
         3) Configure an Autodetected NDMP SCSI Jukebox.
         4) Configure an SJI Jukebox.
         5) Configure an STL Silo.
         6) Configure a Microsoft Removable Storage Jukebox.

What kind of Jukebox are you configuring? [1] 2
Installing 'Standard SCSI Jukebox' jukebox - [email protected].

What name do you want to assign to this jukebox device? ADIC
Turn NetWorker auto-cleaning on (yes / no) [yes]? y
The drives in this jukebox cannot be auto-configured with the available
 information. You will need to provide the path for the drives.

Is (any path of) any drive intended for NDMP use? (yes / no) [no] y
Is any drive going to have more than one path defined? (yes / no) [no] y

You will be prompted for multiple paths for each drive.
Pressing <Enter> on a null default advances to the next drive.


Please enter the device path information in one of the following formats:

        \\.\Tape0 --for local path or
        host:device-path --for remote node or
        host:drive-letter:directory path --for Windows disk file

   After you have entered a device path, you will be prompted for an NDMP
user name for that path's host. If this device path is not an NDMP device,
press the enter key to advance to the next device path.  For NDMP devices,
you need to enter the user name and password the first time we encounter
that NDMP host. Pressing the enter key for the NDMP user name for any
subsequent device path on the same host will set the user name and password
to those defined the first time. You will not be prompted for the password
in such a case.

Drive  1, element 256
Device path 1 ? \\.\Tape0
     Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ? storagenode1:\\.\Tape0
     Enter NDMP user name for host 'storagenode1'?
Device path 3 ?

Drive  2, element 257
Device path 1 ? \\.\Tape1
     Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ? storagenode1:\\.\Tape1
     Enter NDMP user name for host 'storagenode1'?
Device path 3 ?

Drive  3, element 258
Device path 1 ? \\.\Tape2
     Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ?

Drive  4, element 259
Device path 1 ? \\.\Tape3
     Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ?

Drive  5, element 260
Device path 1 ? \\.\Tape4
     Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ?

Drive  6, element 261
Device path 1 ? \\.\Tape5
     Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ?

Drive  7, element 262
Device path 1 ? \\.\Tape6
     Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ? netapp01b:nrst2a
     Enter NDMP user name for host 'netapp01b'? root
Enter NDMP password (characters will not be echoed):
Device path 3 ? netapp01a:nrst2a
     Enter NDMP user name for host 'netapp01a'? root
Enter NDMP password (characters will not be echoed):
Device path 4 ?

Drive  8, element 263
Device path 1 ? \\.\Tape7
     Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ? netapp01b:nrst3a
     Enter NDMP user name for host 'netapp01b'? root
Device path 3 ? netapp01a:nrst3a
     Enter NDMP user name for host 'netapp01a'? root
Device path 4 ?


Please select the appropriate drive type number:
  1) 3480                  20) 9490                  39) LTO Ultrium-3
  2) 3570                  21) 9840                  40) optical
  3) 3590                  22) 9840b                 41) qic
  4) 3592                  23) 9840C                 42) SAIT-1
  5) 4890                  24) 9940                  43) SD3
  6) 4mm                   25) 9940B                 44) sdlt
  7) 4mm 12GB              26) adv_file              45) sdlt320
  8) 4mm 20GB              27) dlt                   46) sdlt600
  9) 4mm 4GB               28) dlt1                  47) SLR
 10) 4mm 8GB               29) dlt7000               48) tkz90
 11) 4mm DAT72             30) dlt8000               49) travan10
 12) 8mm                   31) dst (NT)              50) tz85
 13) 8mm 20GB              32) dtf                   51) tz86
 14) 8mm 5GB               33) dtf2                  52) tz87
 15) 8mm AIT               34) file                  53) tz88
 16) 8mm AIT-2             35) himt                  54) tz89
 17) 8mm AIT-3             36) logical               55) tz90
 18) 8mm AIT-4             37) LTO Ultrium           56) tzs20
 19) 8mm Mammoth-2         38) LTO Ultrium-2         57) VXA

Enter the drive type of drive 1? 38
Are all the drives the same model? (yes / no) [yes] y

A Dedicated Storage Node can backup only local data to its devices.
Should storagenode1 be configured as a Dedicated Storage Node? (yes / no) 
[no]



Jukebox has been added successfully

The following configuration options have been set:

   > Jukebox description to the control port and model.
   > Autochanger control port to the port at which we found it.
   > Networker managed tape autocleaning on.
   > At least one drive was defined with multiple paths.  All such drives 
are
     defined with a hardware identification as well as a path value to 
avoid
     confusion by uniquely identifying the drive.  The hardware 
identification
     for all drives which have one is always 'autochanger_name - Drive #' 
wher
     "autochanger_name" is the name you gave to the autochanger that was
     just defined, and the # symbol is the drive numer.
   > Barcode reading to on.
   > Volume labels that match the barcodes.
   > Slot intended to hold cleaning cartridge to 102.  Please insure that a
     cleaning cartridge is in that slot
   > Number of times we will use a new cleaning cartridge to 50.
   > Cleaning interval for the tape drives to 6 months.

You can review and change the characteristics of the autochanger and its
associated devices using nwadmin.

Would you like to configure another jukebox? (yes/no) [no]

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if
you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [Networker] NETAPP_NDMP\DDS & Devices Problems, Fazil Saiyed
Next by Date:  Re: [Networker] NetWorker + Windows SAN Tapes, Dave Mussulman
Previous by Thread:  [Networker] NETAPP_NDMP\DDS & Devices Problems, Fazil Saiyed
Next by Thread:  Re: [Networker] [I] Re: [Networker] Antw: Problem with Multiple clients from the same computer, King, David
Indexes:  [Date] [Thread] [Top] [All Lists]