Re: [Networker] legato + exchange module failing remotely

You have not set your client resource up as per the instructions.

Your client records should have just MSEXCH:IS in the Save set: field
(eg not C:\ or All).

The save command field which is normally empty needs to have the command
to run an exchange backup.. This is usually just:

nsrexchsv 


If you want to do normal filesystem backups as well you need to create a
second client record which is run by another savegroup.



-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT listserv.temple DOT edu]
On Behalf Of bob flynn
Sent: Friday, 30 June 2006 2:03 AM
To: NETWORKER AT listserv.temple DOT edu
Subject: [Networker] legato + exchange module failing remotely

Hi,

I have the following configuration

    * Exchange 2003 server
    * Legato 7.2.1 Server
    * Current Legato client and Exchange module installed on exchange
      server.

I can backup the exchange server manually from the command line on the
exchange server.

When I attempt to run a scheduled backup, it fails.

I have verified that the backup of non exchange components works, so it
seems to be either not parsing the exchange request correctly or its
incorrectly formed on my side.

An example output;

NetWorker savegroup: (alert) Default completed, total 1 client(s), 0
Hostname(s) Unresolved, 1 Failed, 0 Succeeded. (exduba Failed) Start
time: Wed May 31 15:28:34 2006 End time: Wed May 31 15:28:41 2006

--- Unsuccessful Save Sets ---

* exduba:MSEXCH:IS 1 retry attempted
* exduba:MSEXCH:IS save: Diagnostic: This client is not licensed for
VSS.
* exduba:MSEXCH:IS save: MSEXCH:IS: No such file or directory

--- Successful Save Sets ---

* exduba:c:\dell save: Diagnostic: This client is not licensed for VSS.
* exduba:c:\dell save: Diagnostic: c:\dell will be saved without a
snapshot being taken.
exduba: c:\dell level=full, 9245 KB 00:00:01 15 files
mars: index:exduba level=full, 13 KB 00:00:00 7 files

so the none exchange saveset runs ok, its the exchange saveset that
seems not to trigger the exchange add on ?

Any help appreciated.

-Bob



The information contained in this e-mail and in any attachments is
confidential and is designated solely for the attention of the intended
recipient(s). If you are not an intended recipient, you must not use,
disclose, copy, distribute or retain this e-mail or any part thereof. If
you have received this e-mail in error, please notify the sender by
return e-mail and delete all copies of this e-mail from your computer
system(s).
Please direct any additional queries to: communications AT s3group DOT com.
Thank You.

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER



NOTICE
This e-mail and any attachments are confidential and may contain copyright 
material of Macquarie Bank or third parties. If you are not the intended 
recipient of this email you should not read, print, re-transmit, store or act 
in reliance on this e-mail or any attachments, and should destroy all copies of 
them. Macquarie Bank does not guarantee the integrity of any emails or any 
attached files. The views or opinions expressed are the author's own and may 
not reflect the views or opinions of Macquarie Bank.

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER