New tape drives for a windows storage node would look like the
following:
rd=snserver:\\.\Tape0

Adding the devices, etc can be a bit tricky since you have to add the
devices and update some other fields.

James Rohrich 
UOP LLC
IT Planning
25 E. Algonquin Rd.
Des Plaines, Illinois 60016
Tel: (847) 391-3958
james.rohrich AT uop DOT com


-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of Jim Ruskowsky
Sent: Friday, May 12, 2006 11:20 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] Adding dedicated storage node


I have two quick questions about adding a dedicated storage node

#1 - can I add this without deleting my jukebox and readding it using 
jbconfig?

#2 - I'm used to unix type drive names.  ex /dev/rmt/0cbn, 
rd=myotherserver:/dev/rmt/0cbn
       What would that look like on a windows box - for, say, this 
device...
       I need to consider the unique way unix deals with backslash. 

[email protected]:IBM     ULTRIUM-TD3     5481|Tape, \\.\Tape0
                                           S/N: F001BA0001
                                           ATNN:IBM     ULTRIUM-TD3 
F001BA0001
                                           WWNN:500308C001BA0001
                                           WWPN:500308C001BA0002
                                           PORT:00000001

Thanks

Jim




Jefferies archives and reviews outgoing and incoming e-mail.  It may be
produced at the request of regulators or in connection with civil
litigation. 
Jefferies accepts no liability for any errors or omissions arising as a
result of  transmission. Use by other than intended recipients is
prohibited.

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER