Re: [Networker] Backup server with 2 IP address

you also need to have the reverse dns name of the additional ip as an
alias of the servers own client record....

> -----Original Message-----
> From: Legato NetWorker discussion
> [mailto:NETWORKER AT listserv.temple DOT edu]On Behalf Of Howard Martin
> Sent: Tuesday, 11 April 2006 6:29 PM
> To: NETWORKER AT listserv.temple DOT edu
> Subject: Re: [Networker] Backup server with 2 IP address
> 
> 
> Do the clients have the 2nd NIC's name in the servers file? 
> Have you done 
> the usual checks on name reolution (bith ways long and short)? 
> As I understand it the server network interface is used for 
> the Meta data 
> and the storage node is used for the real backup, so try 
> putting the 2nd 
> NIC in there.
> 
> On Mon, 10 Apr 2006 22:55:06 +0300, Itzik Meirson 
> <imeirson AT MBI.CO DOT IL> 
> wrote:
> 
> >To utilize two adapters without any trunking software you 
> will have to
> >have each adapter on different subnet.
> >Otherwise (as in your example) the Linux host will accept 
> packets on any
> >of the two addresses but will communicate with the outside 
> world only on
> >the adapter with the lower ip address.
> >Itzik
> >
> >-----Original Message-----
> >From: Legato NetWorker discussion 
> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
> >On Behalf Of Terry Lemons
> >Sent: Monday, April 10, 2006 20:11
> >To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> >Subject: Re: [Networker] Backup server with 2 IP address
> >
> >Hi Librado
> >
> >I believe that all IP entities that NetWorker touches, 
> including client
> >names, server names, and even alternate server network 
> interface names,
> >must be registered in your DNS server.
> >
> >Hope this help.
> >tl
> >
> >-----Original Message-----
> >From: Legato NetWorker discussion 
> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
> >On Behalf Of Librado Pamintuan
> >Sent: Monday, April 10, 2006 10:38 AM
> >To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> >Subject: [Networker] Backup server with 2 IP address
> >
> >Good morning to all,
> >I'm trying to utilize the 2nd port of my NIC and somehow the clients
> >cannot talk to the server when I change the setting 'server network
> >interface' to this new address.
> >
> >
> >99.2.2.4 linux2.regina (eth0)
> >
> >
> >
> >then in configured the 2nd port
> >99.2.2.2 linux2_eth1 (eth1)
> >
> >
> >Tried to make some clients to send data to the 2nd port, but 
> they cannot
> >see the backups server, here's the error message.
> >
> >
> >FS1:vol1:data RPC error, Name to address translation failure
> >FS1:vol1:data Cannot access nsr server 99.2.2.2
> >
> >
> >What seems to be I'm doing wrong here? or missing?
> >
> >
> >thanks in advance,
> >
> >
> >Librado Pamintuan
> >Technical Support Analyst II
> >Information Systems Dep.
> >Operations Group
> >City of Regina
> >
> >
> >Phone:          (306) 777-7573
> >General Fax: (306) 777-6804
> >eFax:             (306) 546-6002
> >eMail:            lpamintuan AT regina DOT ca
> >
> >
> >
> ><html><body><font face = "arial" size = "1">
> >DISCLAIMER: The information transmitted is intended only for the
> >addressee and may contain confidential, proprietary and/or privileged
> >material. Any unauthorized review, distribution or other use 
> of or the
> >taking of any action in reliance upon this information is 
> prohibited. If
> >you received this in error, please contact the sender and
> >
> >delete or destroy this message and any copies.
> ></font><body></html>
> >
> >To sign off this list, send email to listserv AT listserv.temple DOT edu and
> >type "signoff networker" in the body of the email. Please write to
> >networker-request AT listserv.temple DOT edu if you have any 
> problems wit this
> >list. You can access the archives at
> >http://listserv.temple.edu/archives/networker.html or via RSS at
> >http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> >
> >To sign off this list, send email to listserv AT listserv.temple DOT edu and
> >type "signoff networker" in the body of the email. Please write to
> >networker-request AT listserv.temple DOT edu if you have any 
> problems wit this
> >list. You can access the archives at
> >http://listserv.temple.edu/archives/networker.html or via RSS at
> >http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> >
> >To sign off this list, send email to 
> listserv AT listserv.temple DOT edu and 
> type "signoff networker" in the
> >body of the email. Please write to 
> networker-request AT listserv.temple DOT edu 
> if you have any problems
> >wit this list. You can access the archives at 
> http://listserv.temple.edu/archives/networker.html or
> >via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> >=============================================================
> ============
> 
> To sign off this list, send email to 
> listserv AT listserv.temple DOT edu and type "signoff networker" in the
> body of the email. Please write to 
> networker-request AT listserv.temple DOT edu if you have any problems
> wit this list. You can access the archives at 
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> 
> 


NOTICE
This e-mail and any attachments are confidential and may contain copyright 
material of Macquarie Bank or third parties. If you are not the intended 
recipient of this email you should not read, print, re-transmit, store or act 
in reliance on this e-mail or any attachments, and should destroy all copies of 
them. Macquarie Bank does not guarantee the integrity of any emails or any 
attached files. The views or opinions expressed are the author's own and may 
not reflect the views or opinions of Macquarie Bank.

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER