Re: [Networker] New library won't autoload tapes

Some wild guesses..
Do your devices have a (J) next to them..they are jukebox devices?

Jukebox enabled? Control port right?  Library enabler installed?

    
Robert Maiello
Pioneer Data Systems

On Thu, 23 Feb 2006 17:10:22 -0500, Matthew Huff <mhuff AT OX DOT COM> wrote:

>That makes sense, except that I can mount the media manually and it
>works. It just won't do load the exact same media if it isn't currently
>in the drive.
>
>----
>Matthew Huff       | One Manhattanville Rd
>Dir of Operations  | Purchase, NY 10577
>OTA LLC            | Phone: 914-460-4039
>www.otaotr.com     | Fax: 914-460-4139
>
>
>
>
>
>> -----Original Message-----
>> From: Joel Fisher [mailto:jfisher AT wfubmc DOT edu]
>> Sent: Thursday, February 23, 2006 5:06 PM
>> To: Legato NetWorker discussion; Matthew Huff
>> Subject: RE: [Networker] New library won't autoload tapes
>>
>> Are the tapes labeled as the correct media type for the drives?
>>
>> I had a similar problem when I reconfiged my silo and
>> mistakenly changed my drive type from 9940 to 9940B.  All my
>> media was then label as 9940 so it wouldn't mount.
>>
>> Joel
>>
>> -----Original Message-----
>> From: Legato NetWorker discussion
>> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
>> On Behalf Of Matthew Huff
>> Sent: Thursday, February 23, 2006 4:25 PM
>> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
>> Subject: [Networker] New library won't autoload tapes
>>
>> I've got a new tape library attached to a storage node.
>> Everything is working;i.e, I can label, mount, unmount,
>> tapes, etc... However when I start a savegroup in announces
>> that it is looking for a volume from the pool, and then sits
>> there. No nsrjb processes are launched, etc..
>> However, if I manually mount the tape in that library, the
>> back immediately starts spooling to the tape. The inventory
>> shows correct, etc..., it just doesn't seem to want to load
>> those tapes. I've verified the drive is selected in the pool, etc...
>>
>> Anyone have a clue?
>>
>> ----
>> Matthew Huff       | One Manhattanville Rd
>> Dir of Operations  | Purchase, NY 10577
>> OTA LLC            | Phone: 914-460-4039
>> www.otaotr.com     | Fax: 914-460-4139
>>
>> To sign off this list, send email to
>> listserv AT listserv.temple DOT edu and type "signoff networker" in
>> the body of the email. Please write to
>> networker-request AT listserv.temple DOT edu
>> if you have any problems
>> wit this list. You can access the archives at
>> http://listserv.temple.edu/archives/networker.html or via RSS
>> at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>>
>
>To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
>body of the email. Please write to networker-request AT listserv.temple DOT 
>edu 
if you have any problems
>wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
>via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>=========================================================================

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER