Networker

Re: [Networker] Power Receptable for ADIC i2000

2006-01-31 06:01:47
Subject: Re: [Networker] Power Receptable for ADIC i2000
From: "Willeat, Todd" <TWilleat AT MHP.SMHS DOT COM>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Tue, 31 Jan 2006 10:01:10 -0600
Mine is an L6-30 (208V, 30 Amp)

-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]On Behalf Of McDougal, Philip H
Sent: Tuesday, January 31, 2006 9:36 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Power Receptable for ADIC i2000


I'm not sure which connector I have but I know that my i2k is 30A and
110V.  I think it can use either but I know I'm using 110V.

HTH.
Phil.






--------------------------------------------------------

 
Philip H. McDougal 
Security Engineer 
Jenner & Block LLP 
One IBM Plaza 
Chicago, IL 60611-7603 
Tel (312) 222-9350 
Fax (312) 840-8879 
PMcDougal AT jenner DOT com 
www.jenner.com 
 
CONFIDENTIALITY WARNING: This email may contain privileged or confidential
information and is for the sole use of the intended recipient(s). Any
unauthorized use or disclosure of this communication is prohibited. If you
believe that you have received this email in error, please notify the sender
immediately and delete it from your system. 
 
--------------------------------------------------------
-----Original Message----- 

From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of Matthew Huff
Sent: Tuesday, January 31, 2006 9:31 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Power Receptable for ADIC i2000

L5-30 is a 110V 30 Amp locking connector L6-30 is a 220V 30 Amp locking
connector

It's possible the device can use either 110V or 220V, but I'd bet that
that big of a box requires 220V.


----
Matthew Huff       | One Manhattanville Rd
Dir of Operations  | Purchase, NY 10577
OTA LLC            | Phone: 914-460-4039
www.otaotr.com     | Fax: 914-460-4139   



 

> -----Original Message-----
> From: Legato NetWorker discussion
> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Jim Ruskowsky
> Sent: Tuesday, January 31, 2006 10:04 AM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: [Networker] Power Receptable for ADIC i2000
> 
> Hey gang -
> 
> I know this isn't a specific NetWorker question, but since it deals 
> with the periphery that I'm sure many of you are using I'll throw it 
> out here.
> 
> We are purchasing two new i2000's (LTO3 drives / redundant
> power) for two of our locations.  The reference guide from the web 
> tells me in one paragraph that I need to install an L6-30 connector, 
> then the following chart shows the need for a NEMA L5-30.  My sales 
> person told me I needed a 6-30R.
> 
> Now the only simlarity here is 30A capacity.
> 
> Can anybody with some real life experience with these in USA tell me 
> what that have in the floor.  I also have a call in to ADIC, again, on

> this issue.  I am trying to avoid having to call the electricians back

> at both sites due to lack of accurate information up front.
> 
> Thanks in advance
> 
> Jim
> 
> 
> 
> 
> Jefferies archives and reviews outgoing and incoming e-mail.  
> It may be produced at the request of regulators or in connection with 
> civil litigation.
> Jefferies accepts no liability for any errors or omissions arising as 
> a result of  transmission. Use by other than intended recipients is 
> prohibited.
> 
> To sign off this list, send email to
> listserv AT listserv.temple DOT edu and type "signoff networker" in the body 
> of the email. Please write to networker-request AT listserv.temple DOT edu if

> you have any problems wit this list. You can access the archives at 
> http://listserv.temple.edu/archives/networker.html or via RSS at 
> http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> 

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if
you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

<Prev in Thread] Current Thread [Next in Thread>