Networker

[Networker] AW: [Networker] jbverify error

2006-01-10 05:09:54
Subject: [Networker] AW: [Networker] jbverify error
From: Christo Papadoulis <Christo.Papadoulis AT ITSQUAD DOT DE>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Tue, 10 Jan 2006 11:07:58 +0100
You can also use jbedit to modify your Autochanger resource.


-----Ursprüngliche Nachricht-----
Von: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] 
Im
Auftrag von Faidherbe, Thierry
Gesendet: Dienstag, 10. Januar 2006 10:53
An: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Betreff: Re: [Networker] jbverify error

Balki,

Once you know the new mapping between drive# and /dev/rmt/...
naming, you have a simple way to correct the jbox resource
without having to recreate the entire lib :

Create a dummy device ( /dev/rmt/toto for sample) and disable 
the new networker device once created.

Unmount all drives from the lib.

Edit then the jbox resource and start swapping the names :
ex to swap 2cbn and 0cbn devices, look at devices field and 
replace /dev/rmt/2cbn -> /dev/rmt/toto then Apply
   then /dev/rmt/0cbn -> /dev/rmt/2cbn then Apply
   then /dev/rmt/toto -> /dev/rmt/0cbn then Apply 
keeping in mind line #0 correspond to drive #0, 
line #1 -> Drive#1, .... 

Then delete dummy /dev/rmt/toto device. Doing so, you will not
have to adapt your pool setting. Same way has to be done
if you are using DDS Sharing devices.

HTH,

Th


Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

HP Services - Storage Division
Tru64 Unix and Legato Enterprise Backup Solutions Consultant
                                   
 *********       *********   HEWLETT - PACKARD
 *******    h      *******   1 Rue de l'aeronef/Luchtschipstraat
 ******    h        ******   1140 Bruxelles/Brussel/Brussels
 *****    hhhh  pppp *****   
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32 (0)2  / 729.85.42   
                             Mobile :   +32 (0)498/  94.60.85 
                             Fax :      +32 (0)2  / 729.88.30   
     I  N  V  E  N  T        Email/MSN : thierry.faidherbe(at)hp.com
                             Internet  : http://www.hp.com/ 
________________________________________________________________________

MOBISTAR SA/NV 

CSO/CTO/CEO/SSD/SBI
SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  / 745.75.81  
Avenue Jean Mermoz, 32          Fax :   +32 (0)2  / 745.89.56  
6041 GOSSELIES                  Email : tfhaidhe(at)mail.mobistar.be
BELGIUM                         Web :   http://www.mobistar.be/
________________________________________________________________________

 

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of Chamkura, Balki
Sent: Monday, January 09, 2006 8:12 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] jbverify error

All:
 
i am having some configuration issues with jukebox.  I am using
Networker 7.2 on solaris 8.  The drive and device  mapping has changed.
 
part of nsrjb command , 

drive 1 (/dev/rmt/0cbn) slot   :    
drive 2 (/dev/rmt/2cbn) slot   :    
drive 3 (/dev/rmt/3cbn) slot   :    
drive 4 (/dev/rmt/1cbn) slot   :    
 
Like you can see, 
now drive 2 maps to 2cnb.  Earlier it was mapping to 1cbn.
Likes drive 3 and 4 are wrongly mapped.
 
I am not able to use drive 2,3 and 4.
How can I fix this.
 
I am enclosing the jbverify log below.
 
Thanks,
-Balki
 

KSH#jbverify
 
 Jbverify is running on host piaqsvr02
 
 no enabled stand alone devices found.
 

 Processing jukebox devices...
 
 Processing jukebox piaq_jb:
 
 Testing drive 1 (/dev/rmt/0cbn) of JB piaq_jb
 
 Testing drive 2 (/dev/rmt/2cbn) of JB piaq_jb
  failed to detect loaded volume on drive /dev/rmt/2cbn 
 even after   10 tries. Giving up...
 Error reported in eject tape from drive /dev/rmt/2cbn! But device is
offline.
 Failed in testing drive 2(/dev/rmt/2cbn) of JB piaq_jb:  Unable to
detect loaded state!
 Testing drive 3 (/dev/rmt/3cbn) of JB piaq_jb 
  failed to detect loaded volume on drive /dev/rmt/3cbn 
 even after   10 tries. Giving up...
 Error reported in eject tape from drive /dev/rmt/3cbn! But device is
offline.
 Failed in testing drive 3(/dev/rmt/3cbn) of JB piaq_jb:  Unable to
detect loaded state!
 Testing drive 4 (/dev/rmt/1cbn) of JB piaq_jb
  failed to detect loaded volume on drive /dev/rmt/1cbn 
 even after   10 tries. Giving up...
 Error reported in eject tape from drive /dev/rmt/1cbn! But device is
offline.
 Failed in testing drive 4(/dev/rmt/1cbn) of JB piaq_jb:  Unable to
detect loaded state!
 
 Jukebox piaq_jb on piaqsvr02 successfully processed.
 

 Finished processing jukebox devices.
 
**********************************************************************
 
                 Summary report of jbverify
                 ======= ====== == ========
 
Hostname   Device Handle    Blocksize  Jukebox  Drv No. Status
--------   -------------    ---------  -------  ------- ------
piaqsvr02  /dev/rmt/0cbn    65536      piaq_jb  1       Pass
piaqsvr02  /dev/rmt/2cbn    65536      piaq_jb  2       Fail
piaqsvr02  /dev/rmt/3cbn    65536      piaq_jb  3       Fail
piaqsvr02  /dev/rmt/1cbn    65536      piaq_jb  4       Fail
 
**********************************************************************
 

 Exiting jbverify successfully.

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if
you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

<Prev in Thread] Current Thread [Next in Thread>