[Networker] Overland LXB and jukebox config

 I have googled and searched the archive, but found nothing.

 I'm trying to configure an Overland LoaderXpress with Networker:
 - RedHat Enterprise 3
 - Sun diffSCSI card, sym53c8xx driver
 - LoaderXpress LXL7110
 - Networker 7.2.1

 A test backup to the tape drive worked fine, but I cannot configure the
 jukebox. sjisn and jbconfig don't see it.

# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: LG       Model: CD-ROM CRN-8245B Rev: 1.16
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 04 Lun: 00
  Vendor: QUANTUM  Model: DLT7000          Rev: 245F
  Type:   Sequential-Access                ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 06 Lun: 00
  Vendor: OVERLAND Model: LXB              Rev: 0524
  Type:   Medium Changer                   ANSI SCSI revision: 02

# /usr/sbin/inquire
[email protected]:LG      CD-ROM CRN-8245B1.16|CD-ROM, /dev/sg0
[email protected]:QUANTUM DLT7000         245F|Tape, /dev/nst0
                                           S/N: PXA32S0531
[email protected]:OVERLANDLXB             0524|Autochanger (Jukebox), /dev/sg2
                                           S/N: 2U04603468
# sjisn  [email protected]
None of the methods tried returned drive serial number information
SJISN: Input/output error
usage: sjisn [email protected]
# sjisn  1.6.0
None of the methods tried returned drive serial number information
SJISN: Input/output error
usage: sjisn [email protected]

# jbconfig
         1) Configure an AlphaStor/SmartMedia Jukebox.
         2) Configure an Autodetected SCSI Jukebox.
         3) Configure an Autodetected NDMP SCSI Jukebox.
         4) Configure an SJI Jukebox.
         5) Configure an STL Silo.
 
What kind of Jukebox are you configuring? [1] 2
jbconfig: Jukebox error: library is becoming ready or not on-line

#  

 Yes, I am aware that the Overland is not on Legato's HWC list, but I
 thought there might be a way to get it to work anyway? I found an article
 on Overland's support site "Why can't I see my Overland LXB Library with
 Backup Exec for NetWare?", stating that Veritas doesn't recognise the LXB
 because its SCSI ID is higher than the tape drive's (6 vs. 4) and suggesting
 to change the LXB's ID to 3. I tried that with no success.

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER