Re: [Networker] Lock/unlock mailbox
2005-10-18 10:10:26
No, I am sorry. Our DellPV 136T has exactly the same settings as you
write, the mailbox is imprt/exprt. It is not configured as storage.
Peter, you are right that DellPV 136T is nearly the same as ADIC scalar
100 , but the Autoclean function does not exist anymore on the DELL
library. I couldn't find
Main menu >More > Setup > AutoClean
but I found the following answer to this:
http://delltalk.us.dell.com/supportforums/board/message?board.id=pv_tape&message.id=1345
I don't think that the definition of the cleaning slot is the problem.
My question to Paul, who has a well working library:
What values did you put in Networkers Available slots field (in Edit
Autochanger -> Volume tab) ?
Hilde
Goslin, Paul wrote:
I wasn't aware the 12 mailbox slots could be used as storage slots...
That must be how Hildegards library is set to cause the mailbox to
always be locked...
We only use ours to insert and withdraw tapes to and from the library.
Our DellPV 136T has the following settings:
Backlit: Yes
Audio On: Yes
Scan on init: Yes
MailBox: imprt/exprt
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of Peter Viertel
Sent: Tuesday, October 18, 2005 8:07 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Lock/unlock mailbox
OK, So I am a storagetek sort of person, but i did a bit of research for
you.... firstly from google i found that the Dell PV 136T is essentially
a rebranded version of ADIC scalar 100 tape library, so...
http://www.adic.com/us/collateral/omS100UsersGuide.pdf
So, if it works the same as the ADIC one does you have a choice of using
the door slots as mailbox or having the slots as storage. If you set
these slots as storage the mailbox door will always be locked... and you
will have 60 slots available, which is what you have told us is the
case.
from the user guide ....
Path: Main Menu > More > Setup > Utils > Config
1 From the main menu, select More. Select Setup and then select Utils.
Select Config. 2 Using Yes/No, Next, and Change, set the following
fields:
* Mailbox - Determines whether the mailbox will be used to import and
export tape cartridges or if the mailbox will be used as storage slots.
* Imprt/Exprt - Indicates the mailbox is for importing or exporting tape
cartridges.
* Storage - Indicates the mailbox is for storage.
3 Select OK.
so - if you find you need to change the mailbox settting then what you
will have is logically a very different jukebox and you will have to
reconfig in legato..
I would suggest firstly you configure the library's auto-clean function,
it makes more sense than having legato do it as it will only happen when
the drives need cleaning if the library manages it.
once all the library changes are done, the easiest way to reconfigure
legato is to completely remove the definition of the jukebox, and also
remove the tape device definitions, then use device autoconfiguration to
discover your library. if asked, say 'No' to cleaning.
After this your legato config should match the real state of the
library.
Let me know if this helps, it's 90% guesswork on my part, so sorry if it
is somethign you have already tried.
-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER AT listserv.temple DOT edu]On Behalf Of Hildegard Gerlach
Sent: Tuesday, 18 October 2005 8:36 PM
To: NETWORKER AT listserv.temple DOT edu
Subject: Re: [Networker] Lock/unlock mailbox
Thanks for your answers. I am happy somebody else has this kind of tape
library. I couldn't resolve the problem yet.
If I do what you told me (I had tried that before but didn't look at the
value of the variables of the sensor information)
Main menu -> Service -> Library -> Diags -> Sensors
Lock/Unlock to lock and unlock the Mailbox
Cancel
I get the following:
first the variables IE Lock and IE Closed are set to 1.
I do
Lock/Unlock and then Cancel
go back to the sensor information
for a second the two variables are set to 0 but then turn to 1
immediately.
This morning we thought about something else:
The tape library has 60 slots from which 12 belong to the mailbox. Is
that right ? I don't know however which are the mailbox slots. What do I
have to write in the Available slots field in Networker ? At
the moment we have in this field 1-59, and slot 60 is set as a cleaning
slot. Could that be the problem ? Should I only have 48 slots as
availabel slots (and which ones) ?
Thanks
Hilde
Goslin, Paul wrote:
We also have a Dell PV136T and we have never had to unlock the mailbox
slots in order to insert or remove tapes, it's always unlocked except
when I place new tapes into them and close the mailbox slot door, then
it locks while it scans the slots... Here are the User-Guide
instructions for unlocking the slots:
Locking/Unlocking the Mailbox
Use Sensors to lock and unlock the Mailbox. This lock feature can be
useful if you want to restrict access to the library. This command is
often used with an Operator Panel password activated.
Path: Main menu -> Service -> Library -> Diags -> Sensors
Use the following steps to lock/unlock the Mailbox.
1. From the Main menu, select Service and then select Library. Select
Diags and then Sensors. The sensor information is displayed. For
information on this dialog, see Getting Sensor Information.
)(Mailbox-lock is named 'IE Lock' in reference, you want to set 'IE
Lock=0' )
2. Select Lock/Unlock to lock and unlock the Mailbox. When you are
done, select Cancel.
-----------------------------------------------------------------------
-
--------
-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of Reed, Jason
Sent: Monday, October 17, 2005 7:22 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Lock/unlock mailbox
I too have a Dell 136T and have the same problems. I have contacted
Dell and legato both on the problem. Both Dell and Legato keep
pointing fingers. So I have come to the point to open the main door of
the unit. Have you gotten a fix for this problem yet?
-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of Hildegard Gerlach
Sent: Thursday, October 06, 2005 10:58 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] Lock/unlock mailbox
Hi,
we are running Legato 7.2 on a Windows 2003 Server with a Dell
PowerVault 136T tape library which has a mailbox with 12 slots. I have
the problem to unlock the mailbox:
The mailbox ist always locked, only switching off and on the library
unlocks it. The description in the DELL Manual Locking/Unlocking the
mailbox (inMain menu -> Service -> Library -> Diags -> Sensors) had no
effect.
I read something about a SCSI command Prevent/Allow Medium Removal
which should be issued from the host application software. I have no
idea where I should find this command. I don't know if my problem is in
Legato or from DELL.
Any help appreciated.
Hilde
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
This e-mail, including attachments, may include confidential and/or
proprietary information, and may be used only by the person or entity
to which it is addressed. If the reader of this e-mail is not the
intended recipient or his or her authorized agent, the reader is hereby
notified that any dissemination, distribution, or copying of this
e-mail is prohibited. If you have received this e-mail in error,
please notify the sender by replying to this message and delete this
e-mail immediately.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
NOTICE
This e-mail and any attachments are confidential and may contain
copyright material of Macquarie Bank or third parties. If you are not
the intended recipient of this email you should not read, print,
re-transmit, store or act in reliance on this e-mail or any attachments,
and should destroy all copies of them. Macquarie Bank does not guarantee
the integrity of any emails or any attached files. The views or opinions
expressed are the author's own and may not reflect the views or opinions
of Macquarie Bank.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] Lock/unlock mailbox, Hildegard Gerlach
- Re: [Networker] Lock/unlock mailbox, Conrad Macina
- Re: [Networker] Lock/unlock mailbox, Reed, Jason
- Re: [Networker] Lock/unlock mailbox, Goslin, Paul
- Re: [Networker] Lock/unlock mailbox, Peter Viertel
- Re: [Networker] Lock/unlock mailbox, Goslin, Paul
- Re: [Networker] Lock/unlock mailbox,
Hildegard Gerlach <=
- Re: [Networker] Lock/unlock mailbox, Goslin, Paul
- Re: [Networker] Lock/unlock mailbox, Goslin, Paul
- Re: [Networker] Lock/unlock mailbox, Peter Viertel
- Re: [Networker] Lock/unlock mailbox, Peter Viertel
|
|
|