Networker

[Networker] IP over FC (IPFC not FCIP)

2005-07-28 15:08:49
Subject: [Networker] IP over FC (IPFC not FCIP)
From: "Ballinger, John M" <john.ballinger AT PNL DOT GOV>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Thu, 28 Jul 2005 12:02:22 -0700
Anyone out there with a SAN doing IP over FC for two hosts communication.
I have two Win2k systems each with a dual port Emulex LP10000 HBA.
I have the latest Multi-protocol Port driver installed on both HBA's.
The 1st HBA port is configured solely for FC and works just fine accessing SAN 
Disk arrays.
The 2nd HBA port is configured solely for Network with FC Polling off.
We use Port WWN zoning on our SAN which is all Brocade with 2 fabrics.
The two hosts 2nd HBA port are on the SAN and zoned to see one-another.
Where do I go from here ?
The same systems both have 2 GigE ports for LAN connectivity but I want a 
dedicated connection between the two systems which are in different buildings 
but both on the SAN fabric2.

thanks in advance for any input etc.

thanks - John

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

<Prev in Thread] Current Thread [Next in Thread>
  • [Networker] IP over FC (IPFC not FCIP), Ballinger, John M <=