Hi,
I've not done any registry changes so please advise.
The tape is not a shared tape device. This is four Storage Nodes, all
located in different locations. They all have a single SDLT320 tapedrive
connected, not a library. The tapedrive is connected to the onboard SCSI
controller in the ML370Gx and it is the only device connected.
Thanks
Stein-Are
On Thu, 2 Jun 2005 10:34:31 -0400, David Gold-news
<dave2 AT CAMBRIDGECOMPUTER DOT COM> wrote:
>Hi,
>
>Any chance that you put the registry change that disables Windows 2003
>plug and play from doing a TUR (Tape Unit Ready) on the tape drives, for
>any Windows 2003 hosts that see the tape drives?
>
>I highly suggest you enable the "check tape header during unload" attribute
>of the changer, that will help detect if this is occuring.
>
>Dave
>
>Date: Wed, 1 Jun 2005 09:37:11 -0400
>From: Stein-Are Smoge <stein.are.smoge AT ROLLS-ROYCE DOT COM>
>Subject: HP ML370G2/G3 and Windows2003
>Hi.
>During the last few months I've had a problem with three Storage Nodes on
>our Remote Offices. Everything seems to work fine. But when the savegrp
>starts on the Server, nsrmmd on the Storage Node crashes and the tape
>is 'unmounted'. Actually it seems that the nsrmmd or networker server get
>out of syndc about the volume that are loaded into the drive.
>Afterwards when I mount the tape everything seems to work. The save
>operations goes ok and data is stored on tape. Sometimes it also seems as
>save get out of sync with savegrp. Save is running on the client but
>savegrp tells the backup was not successful.
>Server: HPUX 11.23 on Itanium - Networker 7.2
>Storage Node and client: Windows 2003 Server I386 - Networker 7.2 and 7.1.3
>
>
>===================================
>David Gold
>Sr. Technical Consultant
>Cambridge Computer Services, Inc.
>Artists in Data Storage
>Tel: 781-250-3000
>Tel (Direct): 781-250-3260
>Fax: 781-250-3360
>dave AT cambridgecomputer DOT com
>www.cambridgecomputer.com
>
>===================================
> -------------------------------------------------------------------------
---
>*Any ideas, suggestion or comments are mine alone, and are not of my
company*
>
>--
>Note: To sign off this list, send a "signoff networker" command via email
>to listserv AT listserv.temple DOT edu or visit the list's Web site at
>http://listserv.temple.edu/archives/networker.html where you can
>also view and post messages to the list. Questions regarding this list
>should be sent to stan AT temple DOT edu
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|